For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

Harmful Effects of Microalgae and Harmful Algal Blooms (Red Tides) on Water Sources

08/10/y 09:38:22

The phenomenon of microalgal blooms in surface water sources, aquaculture ponds, and industrial water supply systems is becoming a major challenge for operations and environmental control

Water Environment Warning

Harmful Effects of Microalgae and Harmful Algal Blooms (Red Tides) on Water Resources

The rapid increase in microalgae density in surface water sources, aquaculture ponds, and industrial water supply systems is becoming a major challenge for environmental management and operation. An excessive buildup of nutrients such as Nitrogen and Phosphorus creates ideal conditions for Algal Blooms and red tides to develop. Clearly understanding the scientific nature and impact mechanism of toxic algae is essential for environmental engineers and managers to design effective monitoring and prevention solutions.

Harmful effects of microalgae and harmful algal blooms

Scientific Nature & Differentiating Harmful Algae from Beneficial Algae

An Algal Bloom is a rapid surge in microalgae cell population within a body of water over a short period, turning the water deep green, red, or brown. Meanwhile, red tide is a specific type of harmful algal bloom occurring in saltwater or brackish environments, caused by explosions of toxic microalgae species belonging to the dinoflagellate group.

✓

Beneficial Algae (Green Algae)

Turns the water a bright green color, evenly distributed throughout the water column. Produces no toxins, generates minimal odor, and serves as a vital natural food source for aquatic life.

⚠

Harmful Algae (Cyanobacteria / Dinoflagellates)

Forms a thick, dark green, paint-like scum floating on the surface during hot, sunny days. Blooms are accompanied by a strong fishy odor and dense foam buildup along the shoreline.

Hidden Contamination Risks from Harmful Algae in Water Sources

1. Nighttime Suffocation (Oxygen Depletion)

Algae photosynthesize and produce oxygen during the day, but at night, the massive biomass consumes large amounts of dissolved oxygen through respiration. This causes DO levels to drop drastically near zero by dawn—the leading cause of mass fish and shrimp suffocation.

OXYGEN Depletion

2. Neurotoxins & Hepatotoxins

Algal species like Microcystis release dangerous extracellular toxins such as Microcystins. Highly heat-stable, these toxins are not destroyed by boiling and cause severe damage to the liver and central nervous system of both aquatic organisms and humans.

3. Mechanical Clogging of Filtration Systems

Dead algal matter sinking to the bottom or suspended in water causes a sharp spike in turbidity. This leads to rapid fouling and clogging of high-tech filtration membranes (RO, UF) in water treatment facilities.

Medical Perspective: Amnesic Shellfish Poisoning (ASP) in Humans

Consuming shellfish (such as shrimp, clams, and mussels) that have accumulated Domoic Acid from toxic algae during red tides can attack human neurological systems, posing severe risks of neurological damage, short-term memory loss, or muscle paralysis.

Economic Impact & Industrial Operations

Aquaculture Economic Loss

Sudden toxic algal outbreaks can wipe out entire commercial shrimp ponds and fish cage farms overnight, causing devastating financial losses for aquaculture farmers and enterprises.

Abnormal pH Fluctuations

Algal blooms cause extreme pH swings throughout the day. Daytime photosynthesis consumes CO2 rapidly, driving pH above 9.0. At night, algal respiration releases CO2, dropping pH sharply. This volatility disrupts coagulants (such as alum or PAC) in water treatment plants.


4. Technological Solutions for Water Monitoring & Control

1
Strict Monitoring of Dissolved Oxygen (DO) Levels

Continuously monitor dissolved oxygen levels, especially during the critical hours from 2:00 AM to 4:00 AM, to promptly activate emergency aeration systems. Equipping specialized DO meters from EMIN helps engineers access accurate real-time field data.

2
Track pH & Turbidity to Predict Algae Density

Continuous measurement enables operators to forecast algal blooms early and adjust treatment chemical dosages accordingly. Additionally, regular sensor calibration using specialized EMIN equipment is essential to maintain measurement accuracy after exposure to algae-contaminated water.

3
Standard Emergency Treatment Procedures

Deploy beneficial probiotics to outcompete harmful algae for nutrients, or apply Copper Sulfate ($CuSO_4$) under strictly controlled doses monitored via advanced water analysis instruments to prevent ecological shock in the aquatic environment.

Water Environment Monitoring & Measurement Solutions from EMIN

EMIN Vietnam officially distributes multi-parameter meters, pH pens, DO meters, and portable turbidity meters from world-leading brands, helping optimize microalgae control and protect water resources.

ຂ່າວທີ່ກ່ຽວຂ້ອງ

SMEMA standard for PCB conveyors
16/11/y 14:00:39

SMEMA was developed to address this specific point; consequently, conveyors, loaders, and unloaders all include an SMEMA port in their technical specifications

Homes on busy streets: How to measure fine particulate matter and exhaust fumes entering your living room
16/11/y 09:42:31

Living in a house facing a main road is particularly frustrating: you might wipe the tables until they’re spotless in the morning, only to find them covered in a layer of dust by the afternoon. Even with the doors tightly shut and the curtains drawn, the house still feels stuffy by evening—permeated by the faint, lingering presence of vehicle exhaust. While regular dust can be swept away, fine particulate matter the kind you can’t even see silently seeps in through the gaps around your doors and windows. So, before you rush to spend money on an air purifier or weather-stripping, take a moment to check the current air quality inside your home and identify exactly where the pollutants are entering

Can Laser Welding Machines Weld Aluminum Effectively ?
16/11/y 08:54:12

Laser welding is presented as an aluminum-joining method that concentrates heat at the weld point, helping limit distortion. Suitable settings depend on material thickness, filler wire use, and trial weld results.

ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ