ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Bandwidth: 50 MHz
Channels: 2
Sample Rate: 1 GS/s
Record Length: 20 K points
Vertical system - Analog channels
Vertical resolution: 8 bits
Input sensitivity range: 1 mV/div to 10 V/div max. in 1-2-5 sequence with probe attenuation set to 1X
DC gain accuracy: ±3.0 % step gain, derated at 0.1 %/°C above 30 °C
Maximum Input Voltage: 300 VRMS, Installation Category II; derate above 4 MHz at 20 dB per decade to 200 MHz
Offset range:
1 mV/div to 50 mV/div: ± 1 V
100 mV/div to 500 mV/div: ± 10 V
1 V/div to 5 V/div : ± 100 V
Bandwidth limit: 20 MHz (Typ)
Input coupling: DC, AC
Input impedance: 1 MΩ ±2 % in parallel with 14 pF ±2 pF
Vertical zoom: Vertically expand or compress a live or stopped waveform
Horizontal system - Analog channels
Timebase accuracy: 20 ppm
Trigger system:
External trigger input: Included on all models
Trigger modes: Auto, Normal, Single Sequence
Trigger Types:
Edge Positive or negative slope on any channel. Coupling includes DC, HF reject, LF reject, and noise reject.
Pulse Width Trigger: on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time.
Runt Trigger: on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Trigger source: CH1, CH2, AUX IN, AC Line
Trigger: Coupling DC, Noise Reject, High Frequency Reject, Low Frequency Reject
Waveform measurements:
Cursors Time, Amplitude, Screen Gating Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, between waveform cursors or full record length.
Display Type: 7-inch TFT Color Display
Display Resolution: 800 horizontal by 480 vertical displayed pixels (WVGA)
Waveform styles: Vectors, Variable persistence, and Infinite persistence.
Input Output Ports
USB 2.0 Host Port Supports USB mass storage devices
USB 2.0 device port Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488
Probe Compensator
Amplitude: 5 V
Frequency: 1 KHz
Power source: 100 to 240 VAC RMS ±10%
Power source frequency: 45 Hz to 65 Hz (100 to 240 V) 360 Hz to 440 Hz (100 to 132 V)
Power consumption: 30 W maximum
Dimensions: 154.95 x 325.12 x 106.68 (Hx W X D)
