ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
1. Featured device
5SGXEA7N2F40C2N
2. Configuration status and set-up elements
JTAG
On-board USB-BlasterTM
Fast passive parallel (FPP) configuration via MAX® II device and flash memory
Two configuration file storage
Temperature measurement circuitry (die and ambient temperature)
3. Clocks
50 MHz, 125 MHz, programmable oscillators (preset values: 624 MHz, 644.5 MHz, 706.25 MHz, and 875 MHz)
SMA connectors for supplying an external differential clock to transceiver reference clock
SMA connectors for supplying an external differential clock to the FPGA fabric
SMA connectors to output a differential clock from the FPGA's phase-locked loop (PLL) output pin
4. General user input/output
10-/100-/1000-Mbps Ethernet PHY (RGMII) with RJ-45 (copper) connector
16x2 character LCD
One 8-postion dipswitch
Eight user LEDs
Four user pushbuttons
5. Memory devices
128-megabyte (MB) sync flash memory (primarily to store FPGA configurations)
6. High speed serial interfaces
Seven full-duplex transceiver channels routed to SMA connectors
Short trace routed on a micro-strip
Six strip-line channels from the with all the trace lengths are matched across channels
21 full-duplex transceiver channels routed to backplane connector
Seven channels to Molex® Impact® connector
Seven channels to Amphenol® XCede®
Seven channels to footprint of Tyco Strada® Whisper® (connector is not populated)
7. Power
Laptop DC input
Voltage margining
The Altera® Stratix® V GX Transceiver Signal Integrity (SI) Development Kit provides a platform for electrical compliance testing and interoperability analysis. The accessibility to multiple channels allows for real-world analysis as implemented in the system with transceiver channels available through SMA and popular backplane connectors. You can use this development kit to perform the following tasks:
