For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

VICTOR 4300 ເຄື່ອງວັດແທກໄລຍະດິຈິຕອນສາມເຟດ (AC: 0.00 V~600V, AC: 0.0mA ~ 20.0A)

ຕິດຕໍ່
ການຊຳລະເງິນທີ່ປອດໄພ
ການຮັບປະກັນຄຸນນະພາບ
ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ
ມີບໍລິການຈັດສົ່ງ

Function:Three Phase, AC current, AC voltage, AC leakage current, direct test of phase sequence; transformer groups, inductive, capacitive circuit discrimination; indirect test of power factor and power

Power:DC9V alkaline batteries(1.5V AA×6)

Consumption

About 80mA at most with enabled backlight, battery working continuously for about 10 hours

About 5mA with disabled backlight, battery working continuously for about 16 hours

Display Mode:LCD display, 240dots×160dots

Meter Size:Length, Width, Height:196mm×92mm×54mm

Clamp Size:

acuminate current clamp:7.5mm×13mm (4300)

round current clamp:35mm×40mm (ETCR4400)

Sampling Rate:About 2 times/second

Measurement Range

AC Voltage:0.00 V~600V

AC Current:0.0mA~20.0A

Phase:0~360°

Measured Signal Amplitude in Phase Test

Votage amplitude range: 10V~600V

Current amplitude range:20mA~10.00A

Data Hold:Press HOLD key to keep data, "DH" symbol appears

Data Storage:99 sets

Automatic Shutdown:Automatic shutdown about 15 minutes later after launching to reduce battery consumption

Backlighting:Suitable for dark place and nightly use

Voltage Detection:Multi Functional DC9V Digital Phase Meter Electric Power Detector 0 Low battery symbol “ " appears to remind the replacement of battery when the battery voltage drops below 7.2V.

Weight:Main Unit about 550g(with battery),acuminate current clamp about 170g×3, round current clamp about 185g×3, test line about 250g

Test Line Length:1.5m

Current Clamp Length:2m

Working Temperature and Humidity:-10℃~40℃; below 80%Rh

Storage Temperature and Humidity:-10℃~60℃; below 70%Rh

Input Impedence:Testing voltage the input impendence is 2MΩ

Withstand Voltage:Withstand 1000V/50Hz sine wave AC voltage for 1 minute between the meter lines and shell; Withstand 500V/50Hz AC voltage sine wave for 1 minute between the two voltage inputs

Insulation:≥10MΩ between meter lines and shell or between the two voltage inputs

Structure:Double insulation, with insulation vibration-proof sheath

 


ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ