Wavecontrol SMP3 Dual ເຄື່ອງວັດແທກພາກສະຫນາມແມ່ເຫຼັກໄຟຟ້າ
Field probes: Automatic detection and recognition
Broadband: 0 Hz - 60 GHz (depending on field probe)
Spectrum analysis: up to 10 MHz
Weighted Peak Method: 1 Hz - 10 MHz (Real time WPM for direct comparison with limits)
Readout values: Total field (instantaneous, max., min. and average) Field components (X, Y, Z)
E Field units: V/m, kV/m, μW/cm2, mW/cm2, W/m2, %
H Field units: nT, μT, mT, T, A/m, %, mG, G
Log time: Configurable (from 0.5 s to 6 min)
Average modes: Fixed o Sliding, according to international standards
Average intervals: 10 s, 15 s, 30 s, 1 min, 2 min, 5 min, 6 min, 10 min, 15 min, 30 min
Schedule measurement: Customized (up to 24 hours)
Memory capacity: More than 1 million samples
Data downloading: USB-C and fibre optics
Firmware updating: USB-C
Alarm: 2400 Hz audible signal (adjustable threshold)
Display type: Color transmissive TFT (480 x 272 pixels)
GPS (optional): Built-in u-blox 8 (56 independent tracking channels)
Digital Output: Probe direct output // Digital output through USB-C for WP400 family probes
Battery: Internal rechargeable Li-ion
Autonomy: > 24 hours
Temperature range: -10 ºC to +50 ºC
Humidity: 5% to 95%, non-condensing
Size: 100 x 215 x 40 mm (3.9 x 8.4 x 1.5 “)
Weight: 635 g (22.4 oz.)
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ