ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Method: Natural gravity convection
Operating temp. range: Room temp.＋5～260℃
Temp. control accuracy: ±1℃（at 260℃）
Temp. distribution accuracy: ±5℃（at 260℃）
Max. temp. reaching time: Approx. 75 min.
Interior material: Stainless steel
Exterior material: Electrogalvanized steel sheet paint
Heat insulating material: Glass wool
Heater: Stainless pipe heater
Heater: 1.2kW
Observation window: 250×280 mm Chemically strengthened glass×3
Cable hole: 30 mm l.D.×1 pcs.(right side)
Exhaust port: 30 mm l.D.×2 pcs.(on top)
Temp. controller: P.I.D. control
Temp. setting method: Digital setting method using the dedicated operation menu key and ▲ ▼ key
Temp display method: Measurement temperature display: Green LED digital display (resolution: 1 ° C) Set temperature display: Red LED digital display (resolution: 1 ° C)
Timer: 0 minutes to 99 hours 59 minutes and 100 to 999 hours 50 minutes (timer weight function, ON / OFF possible)
Operation function: Fixed value operation, program operation, quick auto stop, auto stop, auto start, program auto start
Program mode: Program operation 6 pattern selection (30 steps x 1, 15 steps x 2, 10 steps x 3), step weight function, step hold function, step skip function
Additional functions: Calibration offset function, key lock function, power failure recovery mode selection function, pattern repeat function
Heater circuit control: SSR drive
Sensor: K thermocouple (for temperature control, for independent overheating protector)
Safety device: Self-diagnosis function (temperature sensor abnormality, heater disconnection, SSR short circuit, memory abnormality, internal communication abnormality, temperature input circuit abnormality,
Safety device: automatic overheating prevention function), overheating prevention device, overcurrent leakage breaker
Shelf plate load: Approx. 15kg / pcs.
Shelf support step number / pitch: 9 steps / 30mm
Shelf plate / Shelf bracket: Stainless punching metal, 2 pcs. / 4 pcs.
Internal dimensions（W×D×H mm）: 450×490×450mm
External dimensions（W×D×H mm）: 560×601×820mm
Remarks(dimensions): 99L
Power Source:
Single phase AC100V 12.5A
Breaker capacity and power supply equipment capacity 15A
Weight: 48kg
