For full functionality of this site it is necessary to enable JavaScript.

Máy đo nhiệt độ kim loại nóng chảy Ajay Syscon Tempstick 529

Ứng dụng: Dùng để đo nhiệt độ kim loại nóng chảy như thép, đồng, nhôm, gang, vàng, bạc
Có thể kết nối máy tính để in ra được kết quả nhiệt độ kèm ngày tháng
Bộ nhớ 1000 giá trị
Hiển thị 4 số bằng led cao 0.6"
Nhiệt độ hoạt động: 0º C to 50º C
Vỏ: Chống bụi, bằng nhôm
Kích thước: 63” x 24” x 10” (1544mm, 588, 245mm) (L x W x H)
trọng lượng: 3kg
Giải nhiệt độ: 540 oC - 1750 oC Cảm biến kiểu R tương ứng model R (Chọn mua thêm đầu TIP cảm biến R là vật tư tiêu hao chưa bao gồm)
Độ chính xác toàn hệ thống: ± 3°C
Nguồn: Pin 4Ni/Cd
Thời gian hồi đáp: 3-5 giây

Chọn mua thêm cảm biết tiêu hao sau (khách hàng cần phải mua sẵn số lượng nhiều để đo, vì cảm biến sẽ hỏng sau 1 hoặc vài lần đo)
- Cảm biến BMD Tips (type R): Sử dụng đo trong điều kiện không xỉ (6-8 lần): 2.8 USD/1 cái
- Cảm biến TIP MINI (type R): Sử dụng đo trong điều kiện có xỉ (1 lần), Chiều dài có thể thay đổi (chọn kích thước khi đặt hàng 270 mm đến 570 mm): 3.6 USD 1 cái
- Cảm biến Mark VII (type R): Sử dụng đo trong điều kiện có xỉ (1 lần), Chiều dài có thể thay đổi (chọn kích thước khi đặt hàng 270 mm đến 570 mm): 3.6 USD 1 cái

Chi tiết

Datasheet

Option Sensor Tip

MINI

  • THERMOCOUPLE TIP MINI 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 1500MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.
  • Minitip is used especially for foundry plants
  • Connector type is male
  • Supporter type is Plastic
  • Accuracy: 1deg celcius
  • Usage: Single time used
  • ID/OD: 18MM/32MM
 

MARK III

  • THERMOCOUPLE TIP MARK III 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 1500MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.
  • Mark III is used especially for foundry as well as Steel plants
  • Connector type is Female
  • Supporter type is Plastic
  • Accuracy: 1deg celcius
  • Usage: Single time used
  • ID/OD: 28MM/42MM
 

MARK VII

  • THERMOCOUPLE TIP MARK VII 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 1500MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.
  • Mark VII is used especially for Steel plants
  • Connector type is Male Female
  • Supporter type is plastic / ceramic as required
  • Accuracy: 1deg celcius
  • Usage: Single time used
  • ID/OD: 18MM/32MM
  • Metal Cap: M.S / AL / CU
 

MINITIP REUASBLE

  • THERMOCOUPLE MINITIP REUASBLE 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 900MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.
  • Minitip is used especially for foundry plants
  • Connector type is male
  • Supporter type is Plastic
  • Accuracy: 1deg celcius
  • Usage: Can be used 3-4 times in slag free condition
  • ID/OD: 18MM/32MM
  • Metal Cap: M.S
 

ANTISPLASH

  • THERMOCOUPLE TIP ANTISPLASH / SAFETIP / MULTI DIP 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH PAPER TUBE LENGTH OF 300 TO 900MM AS REQUIRED ACCORDING TO FURNACE CAPACITY.
  • Brand Name: Safetip
  • Accuracy: 1deg celcius
  • Usage: Can be used 10-12 times in slag free condition and avoids spurting and splashing
  • ID/OD: 18MM/32MM
  • Safetip is used especially for foundry and Steel plants
  • Connector type is Mini (Male) / Mark VII (Male Female)
  • Supporter type is Plastic
  • Coating: Ceramic sleeve of 75 / 150MM as per requirement
 

BIG MULTI DIP

  • THERMOCOUPLE TIP BIG MULTI DIP (BMD) 10% (TYPE S) / 13% (TYPE R) / 6/30% (TYPE B) WITH CERAMIC SLEEVE OF 70MM.
  • Brand Name: BMD
  • Accuracy: 1deg celcius
  • Usage: Can be used 8-10 times in slag free condition, only used for 1 metric ton induction furnace and ladle furnace
  • Outer shell is Ceramic
  • Connector type is Mini (Male)
  • BMD is used especially for foundry and Steel plants
 

BIG MULTI DIP (BMD)

  • THERMOCOUPLE TIP BIG MULTI DIP (BMD) K TYPE WITH CERAMIC SLEEVE OF 70MM
  • Brand Name: BMD
  • Accuracy: 1deg celcius
  • Usage: Can be used 8-10 times in slag free condition, only used for small furnace upto 1 ton
  • Outer shell is Ceramic
  • Connector type is Mini (Male)
  • BMD is used especially for Non- Ferrous foundry


Technical specifications:

Type B (Platinum / Rhodium)

Suited for high temperature measurements up to 1800°C. Unusually type B thermocouples (due to the shape of their temperature / voltage curve) give the same output at 0°C and 42°C. This makes them useless below 50°C.

Type K (Chromel / Alumel)

Type K is the 'general purpose' thermocouple. It is low cost and, owing to its popularity, it is available in a wide variety of probes. Thermocouples are available in the -200°C to +1300°C range. Sensitivity is approx 41uV/°C. Use type K unless you have a good reason not to.

Type R (Platinum / Rhodium)

Suited for high temperature measurements up to 1720°C. Low sensitivity (10uV/°C) and high cost makes them unsuitable for general purpose use.

Type S (Platinum / Rhodium)

Suited for high temperature measurements up to 1720°C. Low sensitivity (10uV/vC) and high cost makes them unsuitable for general purpose use. Due to its high stability type S is used as the standard of calibration for the melting point of gold (1064.43°C).

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi