Máy đo lưu lượng từng phần Dynaflox DMDF-OP-B
Hãng sản xuất: Dynaflox Model: DMDF-OP-B - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Kích thước ống : DN300~2000
Máy tính lưu lượng
Vỏ: NEMA4x IP65, nhôm đúc
Kích thước: 260L x 193 W x 80 H mm
Nguồn cấp: 110~240 VAC or 12~28 VDC
Tín hiệu ra: 4-20mA
Nhiệt độ: -40 + 70 C
Lực kế - Bộ chuyển đổi định mức và vận tốc
Vỏ: 290L x 70 W x 25 H mm
Chất liệu: thân PVC , đĩa gắn thép không gỉ
Độ chính xác: Vận tốc: 2% của độ đo, Mức độ: +-0.25% dải đo thấp hơn xác định
Dải đo: Velocity: 0.021 m/s to 4.5 m/s 2 cực. Mức độ: 0~2m, 0~5m
Nhiệt độ: 0~60 C
Nguồn cung cấp: Pin ngoài 12 VDC , Điện áp: 11.5V ~15 VDC
Features
Excellent low flow rate measurement ability, low to 0.021 m/s.
Superior measurement accuracy.
4-20mA and RS485/MODBUS output, GPRS is optional.
Very suitable for sewage measurement.
User-friendly configurations.
Complete in specifications, and can provide a variety of applications.
Flow Calculator
The flow calculator can set the calculate the cross-sectional area of partially filled pipe or open channel,
for circular pipe, it only need to input the inner diameter; for open channel, it only need to input the width;
users also can input up to 20 point coordinates of channel to calculate the cross-sectional area.
The flow calculator can display the velocity, level, flow rate and flow totalizer,
and is configured with 4-20mA and RS485/MODBUS output, GPRS is optional.
DYNAMETERS Velocity and Level Transducer
By using digital signal processing techniques, DYNAMETERS velocity and level transducer is able to perform
in a wide range of environments. It is used to record flows in pipes, channels and small streams and
operates in a wide range of water qualities from fresh streams to primary sewage channels.
DYNAMETERS velocity and level transducer combines water velocity and water depth measurement with
a powerful data logger. Its systems have been tested in small streams and pipes,
and the calibration has been verified in a tow tank.
DYNAMETERS velocity and level transducer is mounted on (or near to) the bottom of the stream/pipe/culvert
and measures the velocity and depth of the water flowing above it.
When installing transducer, a hoop as shown above is needed, at first, fix the transducer on the hoop,
then fix the component in the pipe, and connect the cable to flow calculator.
Technical Specification
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch