Máy đo độ dày ăn mòn Elcometer CG100ABDL+ (B-scan, đo qua lớp sơn, ghi dữ liệu, A-scan, 120Hz)

Hãng sản xuất: ELCOMETER
Model: CG100ABDL+
- Yêu cầu báo giá
Liên hệ
- Thêm vào giỏ hàng
- Mua ngay
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636

Thông số kỹ thuật
Thông tin hãng sản xuất

Chế độ đo: PE, PETP, EE, EEV, CT, PECT
Tốc độ nạp lại màn hình: 120 Hz
Màn hình A-Scan: Điều chỉnh tăng, giảm, dạng sóng đầy đủ
Tốc độ đo:
+ Bằng tay: 4 giá trị đọc mỗi giây
+ Chế độ scan: 50 giá trị đọc mỗi giây
+ Hiển thị thanh scan: 6 giá trị đọc mỗi giây
Thang đo:
+ PE: 0.63 - 508mm
+ PETP: 0.63 - 508mm
+ EEV: 1.27 - 25.4mm
+ PECT: 0.63 - 508mm
+ PECT: 0.01 - 2.54mm
Hiệu chuẩn: 1 điểm, 2 điểm, vận tốc, loại vật liệu
Độ chính xác: ± 1% hoặc ±0.1mm
Độ phân giải: 0.01 mm
Dải hiệu chuẩn tốc độ: 1250 - 9,999m/s
Tốc độ hiển thị B-Scan: 15 giây mỗi màn
Ghi dữ liệu: có
Kiểu đầu dò: Dual element
Dải tần số đầu dò: 1 - 10MHz
Màn hình: 1/8 inch VGA
Đơn vị đo: mm hoặc inch
Kiểu pin: 3 pin kiềm AA
Thời lượng pin: 150 giờ
Nhiệt độ hoạt động: -10 đến 60ºC
Kích thước (w x h x d): 63.5 x 165.0 x 31.5mm
Trọng lượng: 383 g
Giao tiếp RS232 hai hướng
Danh sách đóng gói: Máy chính, chất tiếp âm, hộp cứng, hướng dẫn sử dụng, chứng nhận kiểm tra, 3 pin kiềm AA, phần mềm Elcomaster

Lưu ý: máy chưa gồm đầu dò, chọn đầu dò tham khảo Datasheet Transducer

Chi tiết

CG100 Corrosion Thickness Gauges

With a wide selection of display and measurement modes, automatic gain control and data-logging, the CG100 range of corrosion thickness gauges is ideal for measuring coating and material thickness as well as for locating pits, flaws and defects in materials.

The Elcometer CG100 ultrasonic corrosion thickness gauge is available in four models - from an entry level CG100B to the top of the range CG100ABDL+.

Features:

Range of display & measurement options: Pulse-Echo, Echo-Echo, Pulse-Echo Temp, Comp Mode (PETP), Coating Only Mode (CT), Pulse-Echo Coating Mode (PECT)
Adjustable gain: -30dB to 70dB range
Automatic gain control (AGC)
Time corrected gain (TCG)
Gate control
Threshold adjustment
64 User defined setups
Multiple language display
Multiple calibration and material selection options
High speed scan mode: 32 readings per second
Differential and minimal thickness alarm modes
Data output and storage: 16,000 readings and waveforms or B-Scans
Download to ElcoMaster^® data management software

CG100 Corrosion Thickness Gauges

Technical Specification

Model & Part Number	CG100B	CG100BDL	CG100ABDL	CG100ABDL+
Material thickness digits display	■	■	■	■
B-Scan cross sectional display	■	■	■	■
Combined B-Scan and digits display	■	■	■	■
Scan bar display	■	■	■	■
Coating thickness display	■	■	■	■
A-Scan Display			+ Rectified, - Rectified, Full Waveform (RF)	+ Rectified, - Rectified, Full Waveform (RF)
Measurement Mode	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT	PE, PETP (Temp Compensation), EE (ThruPaint™), EEV, CT (Coating) & PECT
Measurement Rate Manual: Scan mode Scan bar display	4 readings per second 50 readings per second 6 readings per second	4 readings per second 50 readings per second 6 readings per second	4 readings per second 50 readings per second 6 readings per second	4 readings per second 32 readings per second 6 readings per second
Measuring Range	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inches) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.001 - 0.100 inches)	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inches) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.001 - 0.100 inches)	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inch) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.0005 - 0.100 inch)	PE: 0.63 - 508mm (0.025 - 19.999 inches) PETP: 0.63 - 508mm (0.025 - 19.999 inches) EE: 1.27 - 102mm (0.050 - 4.000 inches) EEV: 1.27 - 25.4mm (0.050 - 1.000 inch) CT: 0.01 - 2.54mm (0.001 - 0.100 inches) PECT: 0.63 - 508mm (0.025 - 19.999 inches) PECT: 0.01 - 2.54mm (0.0005 - 0.100 inch)
Measurement Accuracy	± 1% or ±0.1mm whichever is the greater	± 1% or ±0.1mm whichever is the greater	± 1% or ±0.1mm whichever is the greater	± 1% or ±0.1mm whichever is the greater
Measurement Resolution	0.01mm (0.001 inches)	0.01mm (0.001 inches)	0.01mm (0.001 inches)	0.01mm (0.001 inches)
Velocity Calibration Range	1250 - 13,995m/s (0.0492 - 0.5510in/ms)	1250 - 13,995m/s (0.0492 - 0.5510in/ms)	1250 - 13,995m/s (0.0492 - 0.5510in/ms)	1250 - 13,995m/s (0.0492 - 0.5510in/ms)
Additional Features: High speed scan mode	■	■	■	■
Differential mode	■	■	■	■
Limit alarm mode	■	■	■	■
B-Scan display speed	15 seconds per screen	15 seconds per screen	Adjustable display speed	Adjustable display speed
Flaw mode			Basic prove-up flaw detection using single element angle beam transducers	Basic prove-up flaw detection using single element angle beam transducers
Calibration setups	6 factory & 64 user-definable setups transferrable to and from a PC archive	6 factory & 64 user-definable setups transferrable to and from a PC archive	6 factory & 64 user-definable setups transferrable to and from a PC archive	6 factory & 64 user-definable setups transferrable to and from a PC archive
Gates			3 fully adjustable gates: start, stop, width & threshold	3 fully adjustable gates: start, stop, width & threshold
Damping				Adjustable; impedance matching for optimising transducer performance
Pulser type	Dual square wave pulsers up to 140Hz pulse repetition rate	Dual square wave pulsers up to 140Hz pulse repetition rate	Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration	Dual 200 volt square wave pulsers with adjustable pulse width (spike, thin, wide) and 50 volt cut/boost for greater penetration
Gain	Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi	Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi	Manual, automatic gain control (AGC) with 110dB range (limited)	Manual, automatic gain control (AGC) with 110dB range (limited)
Timing	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer	Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer
Data logging		16,000 with B-scan image & gauge settings 210,000 - coating, material, min, max thickness sequential and grid logging Alpha numeric batch identification OBSTRUCT indicates inaccessible locations	16,000 with B-scan image & gauge settings 210,000 - coating, material, min, max thickness sequential and grid logging Alpha numeric batch identification OBSTRUCT indicates inaccessible locations	8,000 with A/B-scan image & gauge settings 210,000 - coating, material, min, max thickness sequential and grid logging Alpha numeric batch identification OBSTRUCT indicates inaccessible locations
Calibration Options	Single, two point, velocity & material type	Single, two point, velocity & material type	Single, two point, velocity & material type	Single, two point, velocity & material type
Transducer Probe Type	Dual element	Dual element	Dual element & flaw prove up	Dual element & flaw prove up
Transducer Frequency Range	1 - 10MHz	1 - 10MHz	1 - 10MHz	1 - 10MHz