For full functionality of this site it is necessary to enable JavaScript.

Máy đo độ ẩm Radome Finna A8-AF

Ứng dụng: Đo độ ẩm Radome trên máy bay

Máy đo độ ẩm của Model A8-AF cho thấy các túi độ ẩm trong các máy bay bằng cách đo sự mất mát điện môi tần số vô tuyến của vật liệu khi tiếp xúc với cảm biến điện cực. 

Nguyên tắc hấp thụ tổn thất điện năng RF là tính năng được cấp bằng sáng chế của tất cả các sản phẩm của Tập đoàn Finna.

Đọc trực tiếp, quy mô so sánh màu cho dấu hiệu tức thời của độ ẩm

Nút điện cực nạp lò xo cho phép kiểm tra không phá hủy các bề mặt không đều hoặc cong

Đi kèm với điện cực, pin sạc, bộ sạc pin, hộp đựng và hướng dẫn vận hành

Hoàn toàn được kiểm tra và chấp thuận bởi Không quân Hoa Kỳ


Vận hành: cầm tay

Nguồn : 220V

Tính năng tiếp xúc: Có tiếp xúc

Phương pháp đo: Tần số vô tuyến

Tính năng đọc : Analog

 

Chi tiết

Product Description

The Model A8-AF radome moisture meter consists of two basic components: the electrode sensor and the metering unit. These components are connected by a 2’8″ cable attached with interchangeable push-in connectors. The separate electrode sensor permits testing in remote areas, and the simple operating procedures allow the Model A8-AF to be used by both technical and non-technical operators.

Equipped with a special direct reading, colored comparator scale calibrated for radomes, the Model A8-AF provides quantitative readings of Good, Fair, Poor, or Unacceptable radomes. The meter also has a low battery charge indication in the form of meter zero drift.

The Model A8-AF radome moisture meter is a direct replacement for the Model AFK2D which was the accepted instrument for many years in the aircraft industry for measuring moisture content of radomes.

Click the link to see an Industry Spotlight of the effects bad radome can have on aircraft and how the A8-AF solves the issue.

Key Features:

  • The Model A8-AF Radome Moisture Meter indicates the moisture pockets in aircraft radomes by measuring the radio frequency dielectric power loss of material in contact with the electrode sensor. The RF power loss absorption principle is a patented feature of all Finna Group products.
  • Direct reading, colored comparator scale for instantaneous indication of moisture
  • Spring-loaded electrode buttons allow nondestructive testing of irregular or curved surfaces
  • Comes with electrode, rechargeable batteries, battery charger, carrying case and operating instructions
  • Completely tested and approved by the United States Air Force
  • Federal Stock Number 6635-01-017-1694

Additional Information

Process

Handheld

Pin Feature

Pinless

Contact Feature

Contact

Measurement Method

Radio Frequency

Reading Feature

Analog

Voltage

115 VAC, 220 VAC

CATALOG


  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi