Bếp cách thủy ổn nhiệt GFL 1105 (41 l)
Hãng sản xuất: Lauda Model: 1105 Xuất xứ: Đức Bảo hành: 12 Tháng - Yêu cầu báo giá
- Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Dải nhiệt độ: nhiệt độ môi trường từ 5 °C đến +100 °C (chế độ sôi)
Dải nhiệt độ (hoạt động với bộ điều chỉnh mực nước): nhiệt độ môi trường từ 3 °C đến +100 °C
Dung tích: 41 l
Kích thước trong (W x D x H): 410 x 296 x 335 mm
Kích thước ngoài (W x D x H): 510 x 490 x 476 mm
Nguồn điện: 230 V / 50...60 Hz / 1,5 kW
Trọng lượng tịnh/đóng gói vận chuyển: ~ 21.2 / 26.4 kgs
Thể tích đóng gói: ~ 0.345 m3
Features:
Large high-contrast TFT-colour display with clear readout of all process data.
Microprocessor-controlled temperature regulation.
The Water Bath is especially made to heat up medical compresses and hot packs.
Excellent temperature constancy: ± 0.1 °C temporal at 50 °C.
Soft-touch keys with characteristic symbols.
Setting and displaying of temperature values in 0.1 °C increments as well as timer values in hours (h) and minutes (min).
Timer with three functions:
> Switch-on delay of temperature control 0:00 to 999:59 h:min.
> Operating time after expiry of switch-on delay from 0:01 to
999:59 h:min or continuous.
> Operating time after expiry of switch-on delay and reaching the set point
temperature from 0:01 to 999:59 h:min or continuous operation.
Separate menu items: temperature limits min/max, over/under temperature alarm up to +/- 10 K, switchover °C/°F and for a process-dependent temperature adjustment.
Visual and acoustic alarm in case of water shortage, over/under temperature and sensor break/short circuit.
Electronic monitoring; in case of fault, cause is reported on display.
Two independently working over-temperature protections.
Heating element, bath interior, cover, lid and perforated tray made of stainless steel.
Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.
Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.
Cover and perforated tray included as standard scope of supply. Water bath 1005 is supplied without perforated tray when ordered with rack 1923 (accessory).
Drain cock at the back of the bath.
The pictured accessories are not included in the unit's standard scope of supply.
Applications:
The Water Bath is successfully used for heating up medical compresses/hot packs as well as for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.
Datasheet
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch
