Máy đo điện trở đa kênh Hopetech CHT3541X (0.01μΩ~300Ω, 0.05% )
Hãng sản xuất: Hopetech Model: CHT3541X - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
-Thông số: Điện trở DC
-Số kênh: mỗi card 8 kênh
-Độ chính xác cơ bản: 0.05%
-Dải đo: 0.01μΩ~300Ω
-Nguồn tín hiệu: dòng điện <100mA
-Tốc độ đo: 3 meas/sec., 10 meas/sec., 30 meas/sec.
-Giá trị hiển thị Max.: 30,000
-Hiệu chuẩn: Short-circuit reset for all ranges
-Bộ so sánh: có thể đc cái đặt cho từng kênh
- Chế độ trigger: auto trigger/internal/remote trigger
-Giao tiếp: RS-232C,handler
-Nguồn cung:
+Điện áp:90VAC-250VAC;
+Tần số: 47Hz~400Hz;
+Công suất: max 15VA
-Kích thước : 263 mm (L)x249mm (W)x102mm (D)
-Trọng lượng: 2.5kg
The CHT3541X is a band new design multi-channel resistance meter with high precision, wide measurement range and compact plug-in card design. The customer can configure a capture card or alarm card according to the different meets. Each test card can scan and test 8 channels resistance. The CHT3541X adopts high performance ARM micro processor control design. 48 channels of resistance can be indicated simultaneously in the true-color 4.3 inches LCD display and each channel can set the comparator separately. The CHT3541X provides resistance range of 10μΩ~300KΩ,giving a maximum display value of 30000 counts. Its temperature compensation function can adapt different testing requirements. The RS232C and HANDLER interfaces can be used to output GD/NG signal, to improve automatic measurement ability on production line. |
Model |
CHT3541X |
Measurement parameters |
DC resistance |
No. of Channel |
Each card has 8 channels. |
Measurement range |
10μΩ~300KΩ |
Signal Source |
current:<100 mA |
Accuracy |
0.05% |
Measuring speed |
3 meas/sec., 10 meas/sec., 30 meas/sec. |
Result display |
available of two fonts display; |
Maximum display value |
30,000 |
Calibration |
Short-circuit reset for all ranges |
Comparator |
the comparator can be set separately in each channel |
Trigger mode |
auto trigger/internal/remote trigger |
Interface |
RS-232C(including SCPIT command),handler (Optional PLC interface) |
Trigger and alarm signal |
Optional alarm card |
Test terminal |
Four-terminal(including 2 detecting-ends and 2 driver-end ) |
Power supply |
Voltage:90VAC~250VAC; Frequency: 47Hz~400Hz;Power: max 15VA |
Dimension & weight |
263 mm (L)x249mm (W)x102mm (D); Weight: 2.5kg |
Accessories |
CHT9340 kelvin test wire |
Others |
LCD display |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch