Thiết bị đo điện Cu lông KASUGA NK-1001A
Hãng sản xuất: KASUGA Model: NK-1001A - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Phương pháp phát hiện: Cảm biến kiểu điện dung
Dải đo ±0.01 - ±99.99nC
Ngõ ra analog: 0 - ±999.9mV
Số lượng tiêu chuẩn của điện tích trên tụ điện trong đầu dò: 0.1μF
Tấm tích điện: Kích thước: 75 mm x 25 mm; Dung lượng điện dung: 8 pF
Nguồn điện: 2 pin AAA alkaline (hoạt động liên tục từ 7 giờ trở lên)
Kích thước: Máy chính: 121×70×22mm
Đầu dò: 167mm×15φ
Trọng lượng: Khoảng 230g (kể cả pin)
Mua thêm:
NK-OP-2 / Đầu dò
Bộ đổi nguồn điện KSD-AC1 / AC (AC100-240V)
Cáp đầu ra KSD-REC / Analog (chiều dài = 1.000 mm)
Coulomb meter (NK-1001A/NK-1002A)
This Coulomb meter is a probe-type device that permits easy measurement of the amount of electrostatic discharge (ESD), which causes electrostatic damage to electronic devices in their manufacturing, inspection and assembly.
The charged device model (CDM) explains many cases of ESD that damage electronic devices. The CDM is a model of a phenomenon in which a high peak current flows at a high speed when the device itself is charged and its external electrode is grounded. The Coulomb meter performs high-precision measurement of the amount of ESD, which is the integral value of the current.
Features
- The amount of electrostatic discharge is easily measured by having the Coulomb meter contact the object of measurement (conductor).
- Capable of measuring the amount of ESD on electronic devices or printed wiring boards surrounded by charged insulators, which is caused by induction charging.
- The measurement method is based on the actual phenomenon of electrostatic destruction (CDM).
- Since the unit contacts the object of measurement it is virtually free from errors caused by differences among measurers.
- Permits switching between two modes: peak hold measurement and continuous measurement.
- The optional conductive probe tip lets the unit be used safely for sensitive products.
- The optional AC adapter enables long and continuous usage of the meter in evaluations, experiments, etc.
- Use of the separately sold ZHO-200PN allows conversion of the device capacitance.
- Use of the separately sold KQ-1400 makes the unit capable of measuring the amount of electrostatic charge (using the Faraday cage method).
Specifications
Model | NK-1001A | NK-1002A |
---|---|---|
Detection method | Capacitor charging | |
Measuring ranges | ±0.01 - ±99.99nC | ±1 - ±9999nC |
Analog output | 0 - ±999.9mV | |
Measurement precision | Within ±5% + 2 counts | |
Measurement mode | Continuous/ Peak hold | |
Standard amount of electrostatic on capacitor in probe | 0.1μF | 1μF |
Operating environment | Temperature: 0°C-40°C,Humidity: 65% RH or below (no condensation) | |
Power supply | 2 AA alkaline batteries (7 hours or more of continuous operation) | |
Dimensions | Main unit: 121×70×22mm Probe: 167mm×15φ |
|
Mass | Approx. 230g(including probe and batteries) | |
Options | NK-OP-2 / Conductive probe tip KSD-AC1 / AC power supply adapter (AC100-240V) KSD-REC / Analog output cable (length = 1,000 mm) |
Names of parts
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch