Bộ thực hành thiết kế mạch logic số CPLD/FPGA LEAPTRONIX LP-2900 WITH ALTERA CYCLONE 5CEFA2
Hãng sản xuất: LEAPTRONIX Model: LP-2900 WITH ALTERA CYCLONE 5CEFA2 Xuất xứ: Taiwan (Đài Loan) - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Phù hợp cho các nhà thiết kế ứng dụng cho truyền thông, tự động hóa công nghiệp, dụng cụ thông minh, xử lý hình ảnh, điều khiển động cơ mở rộng, vv Để cho phép người dùng có các nền tảng thử nghiệm tuyệt vời,
Hỗ trợ chíp
ALTERA: FLEX10K30ATC144 (TQFP-144) / 5CEFA2 (FBGA-256)
XILINX: XC2S50 (PQFP-208)
Bộ phát tín hiệu. 1K/10K/ 100K/1M/10MHz
Công tắc đầu vào locgic
8 × 1 logic input original press point with light
8 × 2 logic input Dip switch
4 impulse press button generator (2 positive pulse; 2 negative pulse)
3 × 4 array keyboard
Bộ chỉ thị ra
8 × 8 led 2 màu
LCD 16 × 2
6 led 7 vạch
3 × 4 LED đơn
còi
Bộ tuyến tính
8bit D/A 2 bộ
8bit A/D 2 bộ
Mạch 8051 1 bộ (không bao gồm vi điều khiển)
mạch CPLD, FPGA
Cung cấp bao gồm: Bộ LP-2900+ bo mạnh CPLD/FPGA CHIP BOARD lắp trên LP-2900, CD, Dây nguồn, Cáp USB
Introduction
Nowadays, CPLD and FPGA have been the first-choice components for the designers. It is suitable for the designers on application for communication, industrial automation, intelligent instrument, image processing, extensive engine control, etc. In order to allow users have excellent experimental platforms, LEAP series has provided platforms based on Altera or XILINX. Enabling engineers to realize the designs of logical circuit from experimental units.
- Basic logic
- Subtractor
- Decoder
- Combinational logic
- Comparator
- Multiplexer
- Adder
- Encoder
- Demultiplexer
- Flip-flop device
- Shift register
- Shift counter register
- Synchronized counter
- Asynchronous counter
- A/D converter
- D/A converter
- 8 × 8 dual color spot array LED control test.
- Digital clock
- Counter
- Electronic alarm clock
- Traffic light control
- Electronic dice
- Keyboard scan
- LCD display control test
- A/D, D/A converter test
- Easy CPU design
- VHDL/AHDL design
- Matching 8051 thematic test
- Communication: USB or Printer Port
- Power: 100V AC~240V AC
- Frequency Range: 50/60 Hz
- Dimension: 32cm x 22.6cm x 3.0/8.5cm
- Weight: 3.5Kg
- Operating Altitude: up to 5000 m
- Operating Humidity: 90% (non-condensing)
- Temperature: +5℃ ~ +45℃
- Chip Supported:
- ALTERA: FLEX10K30ATC144 (TQFP-144) / 5CEFA2 (FBGA-256)
- XILINX: XC2S50 (PQFP-208)
- Signal Generation Unit:
- Programmable frequency generator
- Standard frequency 1K/10K/ 100K/1M/10MHz
- Logic Input Switch:
- 8 × 1 logic input original press point with light
- 8 × 2 logic input Dip switch
- 4 impulse press button generator (2 positive pulse; 2 negative pulse)
- 3 × 4 array keyboard
- Output Unit:
- 8 × 8 dual color point array LED display
- LCD 16 × 2 monitor
- 6 digits 7 nodes monitor
- 3 × 4 LED output
- Buzzer output x 1 set
- Linear Unit:
- 8bit D/A converter x 2 sets
- 8bit A/D converter x 1 set
- MPU unit:
- 8051 and CPLD/FPGA match circuit test
- Operating System: Refers to the original CPLD / FPGA software install requirement.
- Main unit x1
- CD x1 (included Altera Baseline V9.23 driver)
- AC power cord x1
- 25-pin printer cable or USB cable x1
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch