PCE CT 29 Coating Thickness Meter (0~2000 µm)

Measurement on ferrous metal (Fe): 

Measuring range: 0 ... 2000 µm

Resolution:

0.1 µm @ 0.0~99.9 µm

1 µm @ 100~2000 µm

Accuracy: ±(2 % ±2 µm of Mw.)

Repeatability: ±(1 % ±1 µm of Mw.)

Smallest radius of curvature: 1.5 mm

Smallest measuring area: Ø7 mm

Smallest layer thickness: 0.5 mm

Measurement on non-ferrous metal (NFe): 

Measuring range: 0~2000 µm

Resolution:

0.1 µm @ 0.0~99.9 µm

1 µm @ 100~2000 µm

Accuracy: ±(2 % ±2 µm of Mw.)

Repeatability: ±(1 % ±1 µm of Mw.)

Smallest radius of curvature: 3 mm

Smallest measuring area: Ø5 mm

Smallest layer thickness: 0.3 mm

Temperature:  

Measuring range: 0~50 °C / 32~122 °F

Resolution: 0.1 °C / °F

Accuracy: ±1.2 °C / ±2.2°F

Humidity: 

Measuring range: 0~100 % r. h.

Resolution: 0.1 % r. h.

Accuracy:

±3.2 % r. h. @ 20.0~70.0 % r. h.

±4.0 % r. h. @ 0.0~19.9 % r. h.

±4.0 % r. h. @ 70.1~100.0 % r. h.

Further specifications:   

Base material for measurements Ferrous (Fe) and non-ferrous (NFe) metals

Display: 2.4 " LC display

Automatic display orientation : 0, 90, 180 and 270 °, can be switched off (only measuring window)

Statistic functions: average, highest, lowest and SDEV measured value

Measuring modes: direct, groups, SSPC

Units: µm, mm, mils, inch

Power supply: 2 x 1.5 V AA batteries

Interface: Micro-USB (for data transfer only)

Alarm: signal tone and / or LED signal light in case of exceeding of the adjustable upper and lower alarm limit

Switch-off: Off, 30 seconds, 1 minute, 5 minutes

Menu languages: English, German, French, Spanish, Italian, Portuguese, Chinese, Japanese

Operating conditions: 0 ... 50 °C, 20 ... 90 % r.h., non-condensing

Storage conditions: -10 ... +60 °C, 20 ... 90 % r.h., non-condensing

Dimensions: 35 x 64 x 137 mm

Weight: 175 g

- Delivery Scope: 

1 x Surface Tester PCE-CT 29

1 x set of standard foils

1 x carrying case

1 x calibration plates (Fe and NFe)

1 x mass data storage

2 x 1.5 V AA battery

1 x instruction manual