Sundy SDTGA6000A Thermogravimetric Analyzer

Test index: Moisture, ash ,volatile matter and LOI

Continuous test in batches: Yes

Standards: ISO 17246, ISO 18123/18122/18134, ISO 11722, ISO 1171,ASTM D3173/D3174/D3175/D7582, GB/T 30732, GB/T 212

Precision: 0.02% RSD

Furnace temperature: Room temperature~1000℃

Temperature control precision: ±2℃

Temperature resolution: 0.1℃

Reproducibility: Ash: 0.30% (<15.00%); 0.50% (15.00~30.00%); 0.70% (>30.00%)Volatile matter: 0.50% (<20.00%); 1.00% (20.00~40.00%); 1.50% (>40.00%)

Cooling time required for batches of test: No

Furnace Cooling (forced air/N2): 950 to 500°C<30 min

Balance Resolution: 0.0001g

Sample introduction and taking: Automatic

Max. Samples: 19 samples + 1 blank sample position

Quantity of sample / test time:: Full indexes for 19 samples< 120 min (Quick method)

Sample weight: 0.5 up to 5g

Max. power: 4kW

Interface:: RS232

Furnace Heating: Resistance Wound

Temperature Calibration: Standard thermocouple

Temp. control precision: ±2℃ (moisture) ±5℃ (ash, volatile matter)

Gas Flow Rate: GB：Moisture：Nitrogen,30~60 times/h Ash：Air 60~120 times/h ASTM：Moisture：Nitrogen or Air 2~4（Furnace Volume /min）volatile matter：Nitrogen 2~4（Furnace Volume /min）

Power requirement: AC 220 V（±10%），50 / 60Hz

Gas requirement: Nitrogen/Oxygen/Compressed Air

Gas Pressure: Air 5 to 6 bar (75 to 90 psi)

Minimum Gas Purity: Air/Nitrogen/Oxygen 99.5%; dry, oil-free

Sample weighing: Under normal temp.

Test Temperature: Moisture 105℃,Ash 815℃,Volatile matter 920℃～950℃ Can be customized

Humidity: ＜80%

Dimensions: 550x590x530mm

Weight: 70kg

Operational Control: Windows®-based software on external PC/Windows7/ WindowsXP

Advance Calculation: Yes

Analysis Report: Yes

Statistics Report: Yes

System Monitor: Yes