emin

任意函数发生器GW Instek AFG-225(25MHz,120 MSa / s,2CH)

  • 制造商: GW INSTEK
    Model: AFG-225
    • 报价要求 报价要求
  • 联系
  • 价格合理详情请致电

    热线:   (+84) 966520220

    电话:  +84 (24) 62923267


      

  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

Model: AFG-225
Manufacturer: Gwinstek - Taiwan
Origin: Taiwan
Accessories: User manual, Quick Start Guide, test lead GTL-101×2
Option: GPA-501, Power Adapter
Warranty: 12 months

MODEL NUMBER   AFG-125 / AFG-125P AFG-225 / AFG-225P
OUTPUT CHANNELS   1 2
WAVEFORMS   Sine, Square, Ramp, Pulse, Noise, ARB

ARBITRARY 
FUNCTIONS

Sample Rate 120 MSa/s
Repetition Rate 60MHz
Waveform Length 4k points
Amplitude Resolution 10 bits
Non-Volatile Memory 4k points

FREQUENCY
CHARACTERISTICS

Range Sine/Square 1uHz~25MHz
  Ramp 1uHz~1MHz
Resolution 1uHz
Accuracy Stability ±20 ppm
Aging ±1 ppm, per 1 year
Tolerance ≤1 mHz

OUTPUT
CHARACTERISTICS

Amplitude Range

GPA-501 power supply: 1mVpp to 2.5Vpp (into 50Ω)2mVpp to 5Vpp (open-circuit)

USB power supply : 1mVpp to 2Vpp (into 50Ω)2mVpp to 4Vpp (open-circuit)

Accuracy ±2% of setting ±1 mVpp (at 1 kHz)
Resolution 1mV or 3 digits
Flatness ±1% (0.1dB) ≤100kHz±3% (0.3 dB) ≤5MHz,±5% (0.4 dB) ≤12MHz±10%(0.9dB) ≤25MHz(sine wave relative to 1kHz)
Units Vpp, Vrms, dBm
Offset Range

GPA-501 power supply: ±1.25 Vpk ac +dc (into 50Ω)±2.5Vpk ac +dc (Open circuit)

USB power supply: ±1 Vpk ac +dc (into 50Ω),±Vpk ac +dc (Open circuit) 

Accuracy 2% of setting + 10mV+ 0.5% of amplitude
WAVEFORM OUTPUT Impedance 50Ω typical (fixed)> 10MΩ (output disabled)
Protection Short-circuit protectedOverload relay automatically disables main output.

SINE WAVECHARACTERISTICS

Harmonic Distortion

≤-50 dBc   DC ~ 1MHz, Ampl > 1Vpp 
≤-35 dBc   1MHz ~ 5MHz, Ampl > 1Vpp 
-30 dBc   5MHz ~ 25MHz, Ampl > 1Vpp

SQUARE WAVECHARACTERISTICS

Rise/Fall Time 10ns at maximum output. (into 50 Ω load)
Overshoot <2%
Asymmetry 1% of period +5 ns
Variable duty Cycle

1.0% to 99.0% ≤100kHz
10% to 90% ≤ 1MHz
50% ≤ 25MHz

RAMPCHARACTERISTICS

Linearity < 0.1% of peak output
Variable Symmetry 0% to 100% (0.1% Resolution)

PULSECHARACTERISTICS

Period 40ns~2000s
Pulse Width 20ns~1999.9s
Overshoot <2%
Accuracy 0.1%+20ns
Jitter 20ppm +10ns
AM MODULATION Carrier Waveforms Sine, Square, Ramp, Pulse, Arb
Modulating Waveforms Sine, Square, Triangle, Upramp, Dnramp
Modulating Frequency 2mHz to 20kHz
Depth 0% to 120.0%
Source Internal
FM MODULATION Carrier Waveforms Sine, Square, Ramp,
Modulating Waveforms Sine, Square, Triangle, Upramp, Dnramp
Modulating Frequency 2mHz to 20kHz
Peak Deviation DC to Max Frequency
Source Internal
SWEEP Waveforms Sine, Square, Ramp,
Type Linear or Logarithmic
Start/Stop Freq 1uHz to Max Frequency
Sweep Time 1ms to 500s
Source Internal / Manual
FSK Carrier Waveforms Sine, Square, Ramp, Pulse
Modulating Waveforms 50% duty cycle square
Modulation Rate 2mHz to 100 kHz
Frequency Range 1uHz to Max Frequency
Source Internal
PM Carrier Waveforms Sine, Square, Ramp
Modulating Waveforms Sine, Square, Triangle, Upramp, Dnramp
Modulation Rate 2mHz to 20kHz
Phase deviation 0˚ to 360˚
Source Internal
SUM Carrier Waveforms Sine, Square, Ramp, Pulse, Noise
Modulating Waveforms Sine, Square, Triangle, Upramp, Dnramp
Modulation Rate 2mHz to 20kHz
SUM Depth 0% to 100.0%
Source Internal
SYNC OUTPUT Type Sync, Sweep Marker, Burst Marker or Arbitrary Waveform Marker
Level TTL Compatible into 50Ω
Assignment Channel 1 or Channel 2
Polarity Normal or Inverted
Fan-out ≥4 TTL Load
Impedance 50Ω Typical
DUAL CHANNEL FUNCTION Phase -180˚ ~180˚ (Square and Pulse can not be change, Phase is 0°)
Track Synchronize phase
Coupling

CH2=CH1 OR CH1=CH2 
Frequency(Ratio or Difference) 
Amplitude & DC Offset

BURST Waveforms Sine, SquareRamp, Arb
Frequency 1uHz~15 MHz(sine)
1uHz~15 MHz(Square) 
1uHz~1 MHz (Ramp
Burst Count 1 to 65535 cycles or Infinite
Start/Stop Phase -360 to +360
Internal Period 1ms to 500s
Gate Source External Trigger
Trigger Source Single or Internal Rate
TRIGGER DELAY N-Cycle, Infinite 0s to 655350ns
SAVE/RECALL   10 Groups of Setting Memories
POWER OUTPUT Only AFG-125P/AFG-225P

Output Voltage : (2.5V/3.3V/5V)±5%, 
Output Current : 0.6A

INTERFACE   USB (Device)
GENERAL SPECIFICATIONS Power Source DC 5V
  Power Consumption 10 W (Max)
  Operating Environment Temperature to satisfy the specification : 18 ~ 28˚C , Operating temperature : 0 ~ 40˚C ,Relative Humidity:  80%, 0 ~ 40˚C,Installation category CAT II
  Operating Altitude 2000 Meters
  Storage Temperature -10~70˚C, Humidity: ≤70%
  Dimensions (WxHxD) 215(W) x 35 (H) x 107(D) mm
  Weight Approx. 1kg
详细

 datasheet

user manual

注册收新闻 - 获得优惠活动的机会