Warranty: 12 months
Chamber Volume (L / cu ft) 420 lit
Controller Programmable, Touch screen type controller (3.5" Color monitor)
Temperature Range (℃ / ℉)
intake/damper 100% close Amb.+45 to 250 / Amb. +113 to 482
intake/damper 100% open Max. 80 / Max. 176
Temperature Fluctuation 1) 2) at 100℃ (℃ / ℉) 0.3 / 0.54
TemperatureVariation 2) (±℃ / ℉) at 100℃- 1.3 /, at 150℃- 2.3 / 1.26,
at 200℃ - 3.2 / 1.98, at 250℃-4.1 / 3.06
Heating Time (min.) from Amb. to 250℃ 51
Air Change rate (approx, x/h) 173
Air Circulation (approx, x/h) 294
Exhaust air volume flow (approx, L/min) 1400 lít
Air flow velocity (m/s) 0.2 to 0.6
Interior (mm / inch) 750×700×800 mm
Exterior (mm / inch) 1350×1045×1712 mm
Net Weight (kg / lbs) 320 kg
Interface Port Basically RS-232C [RS-485(Maximum 32 Units Control)-optional]
Electrical Requirements (230V, 60Hz) 1ph / 14A
- Air-tight door closure with double sealed packings.
- Heat-resistant silicone double packing completely blocks high heat leakage from the inner chamber.
(only for LBV Models)
- Non-conducting ceramic and heat-resistant silicone packing completely blocks high heat leakage from the inner chamber.(only for LTV Models)
- Two-point door latch also enhances tightness to door closure.
- Energy efficiency is achieved thanks to optimization of the insulation system.
- Even if the unit is operating at max. temperature, the surface of the unit doesn’t allow high temperatures of over 51℃. (DIN EN 563)
- Reliable design and production of door is guaranteed.
- Evaluates the results after opening the door by 90 degrees and applying 50kg load to the point of 30cm from hinges.
- Corrosion resistance stainless steel inner chamber.
- Space efficient and easy loading chamber design.
- Included two shelves for loading of large amounts of samples.
- Heavy load shelving, rated for 40kg are also available. (optional)
- Over-current & Current Leakage Protection. (ELCB, Earth Leakage Circuit Breaker)
- Independent Safety Fuse.
- Important parts such as controller and heaters are highly secured from short circuit. Especially each heater has an individual fuse to completely break a short circuit.
- Reversed-phase Protection.
- Electrical connection error indicator helps user to rapidly fix the connection
- Over-current Protection of Motor.
- Automatic Shut-off in situations where there is over-current to the Motor.
- Door Open Warning.
- Heater & Fan stop when the door is the open state.
- Electric wiring panel access warning.
- Automatic stop if the cover of electric wiring panel is opened.
- Suitable for specific use such as heat treatment and drying process.
- Colorful interactive touch type LCD controller.
- Set point temperature and present temperature areclearly shown together on display.
- Sufficient programmable control support.
- Operating progress can be shown in graph mode for better data understanding.
- Automatic start/stop can be programmed for unattended operations.
- User selectable operation mode after power interruption -ether Automatic run or Manual run.
- Display indicates abnormal temperature changes or power failures.
- Three different language support. (English / Chinese / Korean)
- Temperature and other operating parameters can be recorded using a six channel digital recorder.(optional)
- Programming operation.
Description No. Programmable Pattern Capacity 100 Pattern Repeat Time 999 Part repeat time 255 Max. Segments per a Pattern 100 Available Max. Segments* 6000 Programmable Process Time per a Segment 0 to 99 hr 59 min
- RS-485 communication port(optional) enables connection up to maximum 32 units. Simultaneous monitoring and operating of multiple units is an available feature.
- Program patterns are simple to set with the use of our software.
- Easy to check status of real-time operations.
Graph data supports easy understanding.
- Storage and documentation of programs.
- Data with saving capabilities in excel and text format.
- Storage of program information, backup of value settings, recovery, and temperature values.
- RS-232 communication port as standard offer.