For full functionality of this site it is necessary to enable JavaScript.

THORLABS PDB450C 可切换增益平衡放大器 (800-1700 nm, 可切换增益)

Detector Type: InGaAs/PIN

Wavelength Range: 800 - 1700 nm

Max Responsivity (Typical): 1.0 A/W

Active Detector Diameter: 0.3 mm

Bandwidth (3 dB): DC - 150, 45, 4, 0.3, 0.1 MHz AC Coupled (-AC Suffix): 100 Hz - 150, 45, 4, 0.3, 0.1 MHz

Common Mode Rejection Ratio: >25 dB

Transimpedance Gain(a): 10^3, 10^4, 10^5, 10^6, 10^7 V/A

Minimum NEP(b): 

DC - 0.1 MHz: 0.7 pW/Hz^1/2

DC - 0.3 MHz: 0.5 pW/Hz^1/2

DC - 4.0 MHz: 1.55 pW/Hz^1/2

DC - 45 MHz: 14.9 pW/Hz^1/2

DC - 150 MHz: 68.6 pW/Hz^1/2

RF Output

Conversion Gain RF Output(a,c): 10^3 V/W, 10^4 V/W, 10^5 V/W, 10^6 V/W, 10^7 V/W

CW Saturation Power RF Output: 4.5 mW @ 1550 nm

Impedance: 50 Ω

Max Voltage Swing: ±4.6 V (103 to 106 Gain)(a) ±10 V (107 Gain)(a)

DC Offset: < ±15 mV

RF-Output Coupling: DC or AC

Monitor Outputs

Conversion Gain Monitor Outputs: 10 V/mW @ 1550 nm

Impedance: 220 Ω

Max Voltage Swing: 1.55 V for 50 Ω Load 10 V for High-Impedance Load

Bandwidth: DC to 1 MHz

Voltage Noise: <180 µVRMS

DC Offset: < ±2 mV

General

Fiber Optical Inputsd: FC/PC or FC/APC (Removable)

Photodiode Damage Threshol(d): 20 mW

Electrical Outputs: SMA (Qty. 3)

Dimensions: 85 mm x 80 mm x 30 mm (3.35" x 3.15" x 1.18")

Weight: 0.35 kg (without Power Supply)

Operating Temperature Rangee: 0 to 40°C

Storage Temperature Range: -40 to 70°C

Included Power Supply(f): ±12 V @ 250 mA (100/120/230 VAC, 50 - 60 Hz, Switchable)

(a) Value is given for a high-impedance load. For a 50 Ω load, divide the value by 2.

(b) For more information on NEP, please see Thorlabs' Noise Equivalent Power White Paper.

(c) Given at detector peak responsivity.

(d) For PDB435C FC and PDB465C the FC adapter is NOT removable.

(e) Non-condensing.

(f) A replacement power supply is available below.

Details

MANUAL:



  • 质量承诺
  • 正品保修
  • 送货到家
  • 交易简单化

注册收新闻 - 获得优惠活动的机会