emin

Máy phát tín hiệu cao tần Vector Anritsu MG3710A (100 kHz to 2.7/4/6 GHz)

  • Vector Signal Generator supporting frequencies of 100 kHz to 2.7/4/6 GHz
  • ACLR: -71 dBc (W-CDMA, Test-Model 1, 64DPCH, ≤+5 dBm)
  • Output level +23 dBm (CW, 400 MHz to 3 GHz)
  • Switching Time: <600 s="" list="" sweep="" mode="" li="">
  • Built-in wideband (160 MHz/120 MHz) baseband signal generator
  • Dual RF (Optional) provides two independent RF outputs
  • Dual Waveform Memory (Optional) enables two independently modulated signals per RF Output

The Vector Signal Generator MG3710A is a best-of-class, multi-function, signal generator with excellent RF and baseband performance. The MG3710A features wideband vector modulation and offers built-in baseband waveform generation with large-capacity memory to ensure maximum versatility. It supports all key mobile communications and wireless LAN standards, and it also has the exceptional performance required for emerging and proprietary wireless communications technologies. Dual RF and Dual Waveform options enable a single MG3710A to output up to four independently modulated signals. The MG3710A makes it easy to implement complex test scenarios that would normally require multiple synchronized signal generators, such as:

  • Wanted + Interference Signals for Receiver Blocking Testing
  • Wanted + Two CW Tones for Receiver Intermodulation Testing
  • Wanted + Delayed Signals for Multipath Testing
  • Multiple Wanted Signals for MIMO Testing
  • Multiple Wanted Signals for LTE-Advanced Carrier Aggregation Testing

 

 

For these multi-signal applications, the MG3710A eliminates the cost of extra signal generators, simplifies equipment setup and calibration, streamlines system operations and speeds measurement times. 

The following four types of waveform pattern can be used with the MG3710A

  • Built-in standard waveform patterns
  • Optional waveform patterns (sold separately) (MX3700xxA)
  • Waveforms generated by IQproducer waveform generation software (sold separately) (MX3701xxA)
  • IQ data generated by general-purpose signal-generation software and converted waveform patterns used by MG3710A

 

Data Sheet

 

■ Main Performance and Specifications

Basic Performance

  • Frequency Range:
     
  • High Power Output:
  • SSB Phase Noise:
  • ACLR:
  • Switching Speed:
100 kHz to 2.7/4/6 GHz (1stRF Opt-032/034/036) 
100 kHz to 2.7/4/6 GHz (2ndRF Opt-062/064/066) 
+23 dBm (CW, 400 MHz to 3 GHz) 
<-131 dbc="" hz="" typ="" 1="" ghz="" 20="" khz="" offset="" cw="" br="" style="margin: 0px; padding: 0px;" data-mce-style="margin: 0px; padding: 0px;"> -71 dBc (W-CDMA, Test-Model 1, 64DPCH, ≤+5 dBm) 
<600 s="" frequency="" amplitude="" list="" sweep="" mode="" td="">



Baseband Performance

  • RF Band: Built-in,160 MHz*/120 MHz baseband generator 
    (*: 802.11ac. Only when using MX370111A and MX370111A-002)
  • Large 64 Msamples waveform memory with optional expansion to 1024 Msampls
  • Pre-installed standard waveform patterns 
           LTE (E-TM1.1 to TM3.3), W-CDMA/HSDPA, GSM/EDGE, CDMA2000 1x/1xEV-DO, Bluetooth, GPS, GLONASS, QZSS, 
           PDC, PHS, Broadcast (ISDB-T/BS/CS/CATV), WLAN (IEEE802.11a/11b/11g), Mobile WiMAX
  • Signal generation with waveform generation software (IQproducer) 
           LTE/LTE-Advanced, WLAN 11a/b/g/n/j/p and 11ac, Mobile WiMAX, W-CDMA/HSPA, CDMA2000 1xEV-DO 
           TD-SCDMA, Fading, Multi-Carrier, DVB-T/H, TDMA



Expansion Options

  • AWGN Generator [Opt-049/079] 
           C/N: ≤40 dB
  • BER Measurement Function [Opt-021]   
           Input bit rate: 100 bps to 40 Mbps
  • USB Power Sensor (sold separately) 
           Supports connection of two USB power sensors max. 
           ♦ Frequency Range: 50 MHz to 6 GHz [MA24106A], 10 MHz to 18 GHz [MA24118A], 10 MHz to 26 GHz [MA24126A]  etc.
  • MIMO Signal Source: Supports local input [Opt-017] 
           Baseband clock, local and trigger signals can be shared between up to four MG3710A units to output phase coherency signals 
           synchronized with the signal output timing for configuring an 8x8 MIMO system.
  • Additional Analog Modulation Input for 1stRF/2ndRF [Opt-050/080] 
           Opt-050/080 extends to two internal modulation sources (AM/FM/ΦM) and one external modulation source supporting 
           simultaneous two-signal modulation.



Communications Interfaces

  • Standard 1000BASE-T, GPIB, and USB interfaces
  • Built-in SCPI, MG3700A/MS269xA/MS2830A compatibility modes



Security

  • OS upgrade to Windows 7 [Opt-029] 
            The MG3710A uses the Windows XP OS but it can be upgraded to Windows 7 as an option. 
            Note: Opt-029 can only be selected at new orders; it cannot be retrofitted to delivered units.
  • Secondary Storage HDD for User Data [Opt-011] 
            The secondary HDD storage option can be added/removed to/from the main frame to manage sensitive data, 
            waveform patterns, etc., that must not leave the worksite, laboratory and office.
Hardware Main frameMG3710AVector Signal Generator
Hardware Option 
1st RF  
(Requires one option)
MG3710A-0321stRF 100 kHz to 2.7 GHz
MG3710A-0341stRF 100 kHz to 4 GHz
MG3710A-0361stRF 100 kHz to 6 GHz
Hardware Option 
2nd RF  
(optional) (1xx: Retrofit)
MG3710A-062/1622ndRF 100 kHz to 2.7 GHz
MG3710A-064/1642ndRF 100 kHz to 4 GHz
MG3710A-066/1662ndRF 100 kHz to 6 GHz
Hardware Option 
Common  
(1xx: Retrofit)
MG3710A-001/101Rubidium Reference Oscillator
MG3710A-002/102High Stability Reference Oscillator
MG3710A-011/1112ndary HDD
MG3710A-017/117Universal Input/Output
MG3710A-021/121BER Test Function
MG3710A-029OS Upgrade to Windows 7
MG3710A-313Removable HDD
Hardware Option 
For 1st RF  
(1xx: Retrofit)
MG3710A-018/118Analog IQ Input/Output
MG3710A-041/141High Power Extension for 1stRF
MG3710A-042/142Low Power Extension for 1stRF
MG3710A-043/143Reverse Power Protection for 1stRF
MG3710A-045/145ARB Memory Upgrade 256 Msample for 1stRF
MG3710A-046/146ARB Memory Upgrade 1024 Msample for 1stRF
MG3710A-048/148Combination of Baseband Signal for 1stRF
MG3710A-049/149AWGN for 1stRF
MG3710A-050/150Additional Analog Modulation Input for 1st RF
Hardware Option 
For 2nd RF  
(1xx: Retrofit)
MG3710A-071/171High Power Extension for 2ndRF
MG3710A-072/172Low Power Extension for 2ndRF
MG3710A-073/173Reverse Power Protection for 2ndRF
MG3710A-075/175ARB Memory Upgrade 256 Msample for 2ndRF
MG3710A-076/176ARB Memory Upgrade 1024 Msample for 2ndRF
MG3710A-078/178Combination of Baseband Signal for 2ndRF
MG3710A-079/179AWGN for 2ndRF
MG3710A-080/180Additional Analog Modulation Input for 2nd RF
Software 
Waveform Pattern
MX370073ADFS Radar Pattern [For TELEC/FCC]
MX370075ADFS (ETSI) Waveform Pattern [For ETSI]
MX370084AISDB-Tmm Waveform Pattern
Software 
IQproducer
MX370101AHSDPA/HSUPA IQproducer
MX370102ATDMA IQproducer
MX370103ACDMA2000 1xEV-DO IQproducer
MX370104AMulti-carrier IQproducer
MX370105AMobile WiMAX IQproducer
MX370106ADVB-T/H IQproducer
MX370107AFading IQproducer
MX370108ALTE IQproducer
MX370108A-001LTE-Advanced FDD Option [Requires MX370108A]
MX370110ALTE TDD IQproducer
MX370110A-001LTE-Advanced TDD Option [Requires MX370110A]
MX370111AWLAN IQproducer
MX370111A-002802.11ac (160 MHz) Option [Requires MX370111A]
MX370112ATD-SCDMA IQproducer
Maintenance serviceMG3710A-ES2102 Years Extended Warranty Service
MG3710A-ES3103 Years Extended Warranty Service
MG3710A-ES5105 Years Extended Warranty Service

 


  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi