Máy đo tỷ lệ lỗi bit BERTWave™ Anritsu MP2100B | EMIN.VN

Máy đo tỷ lệ lỗi bit BERTWave™ Anritsu MP2100B

Name: Máy đo tỷ lệ lỗi bit BERTWave™ Anritsu MP2100B
Brand: ANRITSU

Có sẵn: 0 Cái

Hãng sản xuấtANRITSU

ModelMP2100B

Liên hệ

Số lượng

Thanh toán an toàn

Hỗ trợ chuyên nghiệp

Đổi trả dễ dàng

Giao hàng tận nơi

Brochure

BERTWave™ MP2100B
MX210001A Jitter Analysis Software/MX210002A Transmission Analysis Software

Features

Built-in 4ch BERT and sampling oscilloscope
Simultaneous 4ch Bit Error Rate (BER) measurements
High-quality waveform PPG (1 ps rms Jitter)
High-input sensitivity (10 mVp-p minimum input sensitivity)
High-speed Eye Mask test and Eye pattern analysis at 150 ksample/s max.
Supports differential signal BER measurement, Eye Mask test and Eye pattern analysis
Up to six built-in Bessel filters for full-featured application support
Compact (18 cm deep) test set for optical module evaluation
Simultaneous measurement of BER, Jitter, Eye pattern and Eye Mask
Supports WDP measurements
Calculates optimum values for sampling simultaneously with equalizer and emphasis values to display Eye Pattern
Simultaneous Eye Pattern, Eye Mask and Jitter measurements of simulated waveform

Description

The BERTWave MP2100B is an all-in-one test set with built-in BERT and sampling oscilloscope supporting evaluation of optical modules, including BER measurements, Eye Mask tests, Eye pattern analyses, etc.

A BERT and sampling oscilloscope are required measuring instruments for evaluating optical modules used by optical communications systems. Previous evaluations of optical modules, such as QSFP+ and SFP+ modules, required provision of a separate BERT and sampling oscilloscope. However, the BERTWave MP2100B incorporates a BERT supporting up to 4 channels as well as a sampling oscilloscope in a single, compact, 18 cm deep cabinet, slashing equipment investment costs and saving bench-top space. In addition, the BERTWave MP2100B reduces measurement times by eliminating the need to change cable connections at simultaneous BER measurements, Eye Mask tests, and Eye pattern analyses. Additionally, adding the SFP+ plug-in port supports optical BER measurements.

The BERTWave MP2100B BERT function supports BER measurements at speeds ranging from 125 Mbit/s to 12.5 Gbit/s; its built-in 4ch BERT option makes it easy to configure test systems for multichannel modules, such as QSFP+ and AOC. Further, in addition to supporting BER measurements for differential signals, it also supports Eye Mask and Eye pattern Measurements. 　

The BERTWave MP2100B sampling oscilloscope has a bandwidth of 25 GHz (typ.) for electrical interfaces and a bandwidth of 9 GHz (typ.) for optical interfaces. In addition, up to six optional Bessel filters can be built-in for measuring optical signals using the scope. Using these filters, MP2100B supports extinction ratio measurements, Eye Mask tests and Eye pattern analyses for various applications. Further, the scope has a Fast Sampling Mode to secure the fastest high-speed measurements; sampling speeds of up to 150 ksample/s are supported by Fast Sampling Mode, which is 1.5 times faster than legacy models and supports time-saving high-speed Eye Mask tests and Eye pattern analyses.

Using the Jitter Analysis MX210001A software facilitates easy all-in-one simultaneous Jitter analysis, Eye pattern and Eye Mask measurements and the 150 ksample/s sampling speed makes even more efficient use of measurement time. Combined use with MATLAB^® supports waveform dispersion measurements for specific signals, such as WDP, TWDP, and dWDP waveforms.

Last, the Transmission Analysis MX210002A software adds functions for analyzing device transmission (S₂₁ gain and phase), plus a De-Embedded waveform simulation function executed by linear equalizer, filter, and Emphasis calculations. Simultaneous waveform sampling and simulation as well as simultaneous Eye pattern and Eye Mask measurements are supported. Combined use with the MX210001A software also enables simultaneous Jitter measurements of simulated waveforms.

MATLAB^® is a registered trademark of The MathWorks Inc.

BERT

Operation Bit Rate

With MP2100B-092

Without MP2100B-092

PPG, ED Common:
Variable bit-rate range (1 kbit/s step)

125 Mbit/s to 12.5 Gbit/s

PPG, ED Common:
Variable bit-rate range (1 kbit/s step)

8.5 Gbit/s to 11.32 Gbit/s

1/N bit-rate operation range

N=2：	4.25 Gbit/s to 5.66 Gbit/s
N=4：	2.125 Gbit/s to 2.83 Gbit/s
N=8：	1.0625 Gbit/s to 1.415 Gbit/s
N=16：	531.25 Mbit/s to 707.5 Mbit/s
N=32：	265.625 Mbit/s to 353.75 Mbit/s
N=64：	132.813 Mbit/s to 176.875 Mbit/s

Test Pattern

PRBS: 2⁷-1, 2⁹-1, 2¹⁵-1, 2²³-1, 2³¹-1 (Invert ON/OFF)
USER Data: 1.3 Mbits programmable (sample pattern file such as CJPA, etc.)

Electrical Data Output

Data, Xdata

Amplitude

0.1 Vp-p to 0.8 Vp-p

Electrical Data Input

Data, Xdata

O/E Input

Optical data

Wavelength Range

750 nm to 1650 nm

Sampling Oscilloscope

Bandwidth (-3 dB)	Electrical: DC to 20 GHz minimum, DC to 25 GHz typ. Optical: DC to 9 GHz (typ., at electrical -3 dB cutoff without filter)
Display	Eye pattern, Pulse pattern, Coherent Eye
Measurement Function	Statistical (NRZ), Histogram, Mask compliance
Sampling Speed	Normal: 100 ksample/s (typ.) Fast Sampling Mode: 150 ksample/s (max.)
O/E Input (Option 023)	Optical data
Wavelength Range	750 nm to 1650 nm
Clock Recovery (Option 055)	0.1 GHz to 2.7 GHz, 8.5 GHz to 12.5 GHz

Jitter Analysis Software MX210001A

Operating Conditions		Operates only when installed in MP2100B with correct license information The installer runs with V3.00.00 or later Other use conditions comply with MP2100B series The WDP runs under MATLAB R2010b SP1
Measurement Algorithm		Histogram mode, Pattern search mode
Histogram Mode	Measurement Items	TJ (1.0E-12), TJ (user defined), RJ (d-d), DJ (d-d), DDPWS, J2 Jitter analysis, J9 Jitter analysis, Eye opening
Pattern Search Mode	Measurement Items	TJ (1.0E-12), TJ (user defined), RJ (d-d), RJ (rms), DJ (d-d), PJ (p-p), DDJ (p-p), DCD, ISI (p-p), Eye opening, J2 Jitter analysis, J9 Jitter analysis, DDPWS, PJ Frequency
	WDP Measurement	Requires installation of MATLAB^® 2010b by MathWorks
	Measurement Items	WDP, dWDP, TWDP, dTWDP, WDPc, dWDPc, TWDPc, dTWDPc

Transmission Analysis Software MX210002A

Operating Conditions		Operates only when installed in MP2100B with correct license information The installer runs with V3.00.00 or later Other use conditions comply with MP2100B series
Measurement Mode		Transmission analysis, Waveform estimation
Transmission Analysis	Measurement Items	Gain graph, Phase graph, Group delay graph (Phase graph and Group delay graph switching display)
Waveform Estimation	Equalizer Setting	Selects reflector, non-reflector at calculation
	Emphasis Format	2Post/1Pre, 3Post, 1Post/1Pre, 2Post, 1Post
	Device Character	Reads S2P file
	Jitter Analysis	Displays estimated waveform calculation results at MX210001A (when MX210001A installed in MP2100A)