Máy đo màu tự động không tiếp xúc Bevs BEVS 3212 (X,Y: 10-500mm/s; Z: 10-100mm/s; 0.75 x 1mm)
Thời gian đo đơn: 0.2s
Khoảng thời gian đo tối thiểu: 0.2s
Diện tích đo tối thiểu: 0.75 x 1mm
Kích thước mẫu tối đa: 180 x 180mm
Tốc độ trục X: 10-500mm/s
Tốc độ trục Y: 10-500mm/s
Tốc độ trục Z: 10-100mm/s
Độ chính xác của máy đo màu: △E*ab<0.2
Độ chính xác định vị lại của trục XY: 0.1mm
Khoảng cách giữa bề mặt mẫu và cổng đo của máy đo màu: 1±0.2mm
Trọng lượng thô: 180 KG
Điện đầu vào: Điện áp: 220V/50Hz
Công suất: 450W
Nhiệt độ làm việc: 15-30℃
Độ ẩm: 20-80% RH (Không ngưng tụ)
Kích thước: Dài x Rộng x Cao (980x730x1550mm)
Introduction
BEVS Non Contact Automatic Color Measurement Machine (NCACM) is an intelligent and automatic non-contact color measurement system based on BEVS intelligent control system and spectrophotometer. It has high integration and scalability. BEVS NCACM is able to realize continuous and fast non-contact measurement and the efficiency increased by more than 60%. It can also reduce the damage and scratch when contacting the sample during measuring. BEVS NCACM has a more prominent advantage in measuring small sample,it can measure many samples at a time with fixture.
Construction

BEVS 3212 NCACM machine is mainly composed of color measurement module, XY axis module, sample fixture, software interface display, PC case and electrical control cabinet. The color measurement module is composed of a spectrophotometer and a Z-axis motion module. The spectrophotometer is installed in the Z-axis module. The control system can control the upper and lower motion. The sample fixture is fixed on the XY-axis module. The control system can control the movement of the sample fixture at any point on the XY-axis plane.
Software System
Operator can control the spectrophotometer, BEVS automatic measurement control system and USB Camera by PC.
The functions of the software:
1) Calibration of Spectrophotometer, real-time control of color measurement and data.
2) Programming control of BEVS automatic measurement and control system XY axis module positioning to coordinate (X, Y) points.
3) Connecting USB Camera to assist verification and positioning.
4) Programming measurement program
5) Real-time display of measurement results and save
6) Output testing report

Order Information
BEVS 3212 Non Contact Automatic Color Measurement Machine
(Enable to customize upon requirements)
Datasheet
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi

