Máy đo oxy hòa tan trong bia, men, nước đã khử oxy OXY CENTEC OXYTRANS M

Dùng đo oxy hòa tan trong bia, men, nước đã khử oxy
Dải đo pha lỏng: I) 1 ppb - 2 ppm hoặc II) 30 ppb - 35 ppm
Độ chính xác pha lỏng: I) ± 1 ppb hoặc II) ± 30 ppb
Dải đo pha bằng khí: I) 0 - 4,2% O2 hoặc II) 0 - 50% O2
Độ chính xác của pha khí: I) ± 0,002% O2 hoặc II) ± 0,03% O2
Thời gian đáp ứng: t90 ≤ 10 s
Áp suất vận hành tối đa: 12 bar
Nhiệt độ hoạt động: - 5 - + 55 ° C (chọn mua thêm tới: + 98 ° C)
Cảm biến nhiệt độ Pt100
Chất liệu: 1.4404 / AISI 316L, silicone (FDA), PTFE (FDA)
Ống kết nối: đường kính 6 mm
Lập sổ tay hướng dẫn và tự động với thời gian ghi từ 5 đến 600 giây; Khoảng 5.000 giá trị đo; Phần mềm máy tính và giao diện USB
Bảo vệ: IP65
Pin nguồn, có thể sạc lại được
Trọng lượng :1,65 kg

Application:

OXYTRANS M is a portable, optical oxygen sensor for measuring O2 in degassed water, wort, beer, and CO2. Dissolved oxygen has adverse effects on flavor stability and shelf life.

OXYTRANS M - O₂ measurement (optical; portable)

The OXYTRANS M is ideally suited for the continuous measurement of dissolved oxygen in liquids and gases. The instrument is designed for applications requiring maximum sensitivity and the highest accuracy. It is easy to use and virtually maintenance-free. Electrolyte solutions are not required, and no oxygen is consumed during measurement. The optical measurement technology is based on the luminescence quenching effect, i.e., the non-radiative transfer of excitation energy through molecular interaction. A small glass component containing a thin layer of indicator molecules, the optical window, is integrated into the measuring head. The indicator molecules are irradiated with blue-green light generated by an LED in the oxygen sensor. They absorb the incident light and are excited to a higher energy state. After a certain time, the molecules convert back to their ground state, emitting red light. This red light is detected by the sensor. If O₂ molecules are present, the energy is transferred from the excited indicator molecules to the oxygen. This molecular interaction results in the excitation energy being transferred non-radiatively. The detected signal decreases with increasing concentration of oxygen molecules in the product. Other gases do not absorb this energy and therefore have no influence on the measurement result. Temperature drifts of the measurement signal are automatically compensated for by an internal Pt100 sensor. Thanks to its IP65-rated aluminum housing, the OXYTRANS M is a very robust, portable device. The tubing is easy to connect.

Optical technology; no electrolyte and membrane changes necessary.

Short response time and excellent long-term stability

Suitable for a wide range of concentrations and temperatures

Highly accurate and virtually maintenance-free

Robust aluminum housing (IP 65)