Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi

Ứng dụng
Mô tả và phân loại cấu trúc đất
Lấy mẫu đất trên mực nước ngầm
Lấy mẫu đất dưới mực nước ngầm
Nghiên cứu đất về môi trường
Lấy mẫu trầm tích
Máy lấy mẫu than bùn cho phép lấy mẫu không bị xáo trộn từ đất mềm ở độ sâu được xác định trước thay mặt cho:
Nghiên cứu về môi trường
Diễn giải trực quan về lớp đất
Lấy mẫu trầm tích mềm
Nghiên cứu cổ sinh vật học
Thông số kỹ thuật
Kết nối: Ren vít
Độ sâu mẫu tối đa: 10 m
Vật liệu sản phẩm: Thép không gỉ, sắt, vật liệu khác
Đường kính mẫu: 52 mm
Chiều dài mẫu: 50 cm
Thông số mẫu: Bán xáo trộn
Thể tích mẫu: 530 ml
Vị trí lấy mẫu: Dọc
Kích thước gói: 117 x 27 x 23 cm
Trọng lượng: 32 kg
Description
The stainless steel peat sampler is pushed into the soil by hand. Half a cylinder is used to contain the obtained sample. The cone of the peat sampler is massive, distinguishing it from the standard gouge auger.
The sample containing section is sealed off by a plate (fin) that can pivot around the axle in the middle of the sampler and that is fitted with a cutting edge on one side. Having arrived at the correct sampling depth the complete sampler is given half a turn clockwise (180°). During the turning the fin remains in position, which allows the half cylinder to be filled and closed again. The half circular sample cylinder is kept closed by the other side of the fin during extraction.
The peat sampler can only be used in flabby and very soft soils. To achieve maximum stability the connections between the T-handle, the extension rods and the bottom part are conic threaded connections. Please note that due to the thick tip, limited penetration into stiff material is possible and water plant roots will be pushed aside.
Set contains
Edelman auger
Peat sampler
Push-/pull handle
Tools
Maintenance kit
Fibre glass utility probe
The whole is kept in a sturdy aluminium transport case
Datasheet