Bộ vòng lấy mẫu đất - model E53, nặng Eijkelkamp 07.53.SE (53mm, 51 mm, 100 cc)

Ứng dụng

Độ thấm nước

Độ thấm khí

Trọng lượng theo thể tích

Mật độ

Mối quan hệ đất-nước-không khí ở sức chứa ngoài đồng ruộng

Phân bố lỗ rỗng

Sự khuếch tán oxy

Xác định độ ẩm theo các mức độ căng ẩm khác nhau, từ đó có thể tạo ra đường cong pF

Thông số kĩ thuật

Đường kính mẫu: 53 mm

Chiều cao mẫu: 51 mm

Thể tích mẫu: 100 cc

Thông số mẫu: Không bị xáo trộn

Mẫu được lưu trữ trong: Container

Vị trí mẫu: Dọc

Kích thước gói: 117 x 27 x 33 cm

Trọng lượng: 31 kg

Description:

With this sample set, undisturbed samples can be taken in soft soils to a depth of 2 metres with a diameter of 53 millimetres, provided there are no rocks in its way. Suitable for sampling on the surface, in auger holes or in profile pits, above as well as under groundwater level. There are also two other types of sets available with a different ring size.

The physical properties of soils are largely determined in the laboratory. Such studies usually require undisturbed soil samples, preferably with uniform dimensions. To meet these requirements, soil samples are taken in rings of a known volume and diameter.

Royal Eijkelkamp soil sample rings are made of seamless stainless-steel tube, smooth inside and out for as less as possible friction. The bottom of the ring has a cutting edge. The precise made dimensions and thus the volume content of the ring is exact, which makes it highly suitable for laboratory studies. This set is not suitable for hammering. 

Features:

Sample ring kit model E53 heavy has a heavy duty sample ring holder for sampling in hard soils. This is a standard set for a depth of 2 metres. The kit is used for soil sample rings with a diameter of 53 millimetres. Soil sample ring kits are used for a variety of tests, including bulk density determination of soil.

Standard set for a depth of 2 metres

Suitable for hammering

Undisturbed sample

Sample ring protected by ring holder 

Kit allows sampling at surface and at depth 

Manual