Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi

Máy bơm chìm MP 1 ống LDPE 30m
Công suất đầu vào: 1.3kW
Điện áp: 3 x 220 V 400 Hz
Dòng điện tối đa: 5.5 A
Thiết bị bảo vệ : Công tắc nhiệt tích hợp
Nhiệt độ nước: 0 °C đến +35 °C
Cổng xả: Rp 3/4
Hoạt động liên tục: 500 giờ
Kích thước máy : 120 x 80 x 100 cm | 47.2 x 31.4 x 39.3 inch
Ứng dụng
Lấy mẫu kỵ khí
Làm sạch và lấy mẫu giếng giám sát
Dùng nâng 90 mét nước
Description
The MP 1 / Redi-Flo2 submersible pump is specially designed for purging and sampling of monitoring wells. Originally designed by Grundfos, Royal Eijkelkamp is now exclusive manufacturer of this unique groundwater pump. It’s the only pump in the world which can lift water up to 90 m above water level within a well with a diameter as small as 50 mm (2 inch)! This pump can be delivered with a re-usable PTFE tube, a low-cost LDPE tube, or no tube. The high capacity of this pump allows for quick purging of the measuring point. By setting a low pumping capacity the same pump can be used for sampling. The pump housing is completely made of stainless steel, which helps prevent contamination of the sample. The pump motor is controlled by an adjustable frequency converter. Thanks to the variable setting of the frequency, the capacity of the pump can be adjusted from 0 to 2m3 /hour. This results in a steady flow of anaerobe water.Every measurement point must be purged before samples can be taken. The large capacity of the MP 1 pump ensures that the measuring point is quickly purged. By setting it at a lower pumping capacity, the MP 1 can also be used for sampling.Built-in safeguards protect the MP 1 and the converter against overload. The actual frequency can be read from a display.
Available variants
12.27.SF PTFE tube, 30 metres
12.27.SG PTFE tube, 60 metres
12.27.SH PTFE tube, 90 metres
12.27.SL LDPE tube, 30 metres
12.27.SM LDPE tube, 60 metres
12.27.SN LDPE tube, 90 metres
No tube
Set contents
The set is delivered fully assembled and contains:
Submersible pump MP 1
Cooling jacket
Frequency converter
Tube option of choice
Cables
Hose reel cart
Service kit
Manual
Brochure