Máy đo độ dày lớp phủ Elcometer A456CFBI3 (0-13mm, tích hợp đầu dò từ tính)
Hãng sản xuất: ELCOMETER Model: A456CFBI3 - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
Thang đo: 0-13mm
Độ phân giải: 1μm: 0-2mm; 10μm: 2-13mm
Độ chính xác: ±1-3% hoặc ±50μm
Tích hợp đầu dò từ tính
Loại bộ nhớ hiệu chuẩn; gauge (g) hoặc gauge & batch (gb):g
Bộ nhớ máy đo: Last 5
Đầu ra dữ liệu: USB; vào máy tính
Cấp bảo vệ IP: IP64
Màn hình: 2,4 inch (6cm) màn hình QVGA TFT màu, 320 x 240 pixel
Loại pin: 2 pin AA khô, pin sạc cũng có thể được sử dụng
Tuổi thọ pin: ~ 24 giờ sử dụng liên tục trong 1 giá trị đọc mỗi giây
Kích thước đo (h x w x d): 141 x 73 x 37mm
Trọng lượng máy đo: 161g bao gồm pin cung cấp
Nhiệt độ hoạt động: -10 đến 50 ° C
Đóng gói: Máy chính 456, lá hiệu chuẩn, hộp bảo vệ, 2 pin, hướng dẫn sử dụng
The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.
The Elcometer 456 dry film thickness gauge is available in three different models. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 Model B, to the top of the range Elcometer 456 Model T.
Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during coating thickness measurement - allowing for consistent, repeatable and accurate dry film thickness results.
Elcometer 456 Coating Thickness Gauge
Technical Specification
Integral Model Options |
|||||||||
Scale 1 |
Range: 0-1500μm (0-60mils) |
Accuracy*: ±1-3% or ±2.5μm (±0.1mil) |
|||||||
|
Resolution: 0.1μm: 0-100μm; 1μm: 100-1500μm (0.01mil: 0-5mils; 0.1mil: 5-60mils) |
||||||||
|
Model B |
Model S |
Model T |
C |
|||||
Elcometer 456 Ferrous Integral |
A456CFBI1 |
A456CFSI1 |
A456CFTI1 |
● |
|||||
Elcometer 456 Non-Ferrous Integral |
A456CNBI1 |
See separate gauges with N2 PINIP™ Probe |
See separate gauges with N2 PINIP™ Probe |
● |
|||||
Elcometer 456 Dual FNF Integral |
A456CFNFBI1 |
A456CFNFSI1 |
A456CFNFTI1 |
● |
|||||
|
|
|
|
|
|||||
Scale 2 |
Range: 0-5mm (0-200mils) |
Accuracy*: ±1-3% or ±20μm (±1.0mil) |
|||||||
|
Resolution: 1μm: 0-1mm; 10μm: 1-5mm (0.1mil: 0-50mils; 1mil: 50-200mils) |
||||||||
For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance |
|||||||||
|
Model B |
Model S |
Model T |
C |
|||||
Elcometer 456 Ferrous Integral |
A456CFBI2 |
See separate gauges with F2 PINIP™ Probe |
See separate gauges with F2 PINIP™ Probe |
● |
|||||
|
|
|
|
|
|||||
Scale 3 |
Range: 0-13mm (0-500mils) |
Accuracy*: ±1-3% or ±50μm (±2.0mils) |
|||||||
|
Resolution: 1μm: 0-2mm; 10μm: 2-13mm (0.1mil: 0-100mils; 1mil: 100-500mils) |
||||||||
|
Model B |
Model S |
Model T |
C |
|||||
Elcometer 456 Ferrous Integral |
A456CFBI3 |
See separate gauges with F3 PINIP™ Probe |
See separate gauges with F3 PINIP™ Probe |
● |
|||||
|
|
|
|
|
|||||
Separate Model Options |
|
|
|
|
|||||
</sp |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch