Máy đo độ dày ăn mòn Elcometer CG100ABDL+ (B-scan, đo qua lớp sơn, ghi dữ liệu, A-scan, 120Hz)
Hãng sản xuất: ELCOMETER Model: CG100ABDL+ - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222) 730.39.68
TP. Hải Phòng: (0225) 730.03.89
TP. HCM: (028) 38.119.636
Đồng Nai: 0345.689.536
Chế độ đo: PE, PETP, EE, EEV, CT, PECT
Tốc độ nạp lại màn hình: 120 Hz
Màn hình A-Scan: Điều chỉnh tăng, giảm, dạng sóng đầy đủ
Tốc độ đo:
+ Bằng tay: 4 giá trị đọc mỗi giây
+ Chế độ scan: 50 giá trị đọc mỗi giây
+ Hiển thị thanh scan: 6 giá trị đọc mỗi giây
Thang đo:
+ PE: 0.63 - 508mm
+ PETP: 0.63 - 508mm
+ EEV: 1.27 - 25.4mm
+ PECT: 0.63 - 508mm
+ PECT: 0.01 - 2.54mm
Hiệu chuẩn: 1 điểm, 2 điểm, vận tốc, loại vật liệu
Độ chính xác: ± 1% hoặc ±0.1mm
Độ phân giải: 0.01 mm
Dải hiệu chuẩn tốc độ: 1250 - 9,999m/s
Tốc độ hiển thị B-Scan: 15 giây mỗi màn
Ghi dữ liệu: có
Kiểu đầu dò: Dual element
Dải tần số đầu dò: 1 - 10MHz
Màn hình: 1/8 inch VGA
Đơn vị đo: mm hoặc inch
Kiểu pin: 3 pin kiềm AA
Thời lượng pin: 150 giờ
Nhiệt độ hoạt động: -10 đến 60ºC
Kích thước (w x h x d): 63.5 x 165.0 x 31.5mm
Trọng lượng: 383 g
Giao tiếp RS232 hai hướng
Danh sách đóng gói: Máy chính, chất tiếp âm, hộp cứng, hướng dẫn sử dụng, chứng nhận kiểm tra, 3 pin kiềm AA, phần mềm Elcomaster
Lưu ý: máy chưa gồm đầu dò, chọn đầu dò tham khảo Datasheet Transducer
CG100 Corrosion Thickness Gauges
With a wide selection of display and measurement modes, automatic gain control and data-logging, the CG100 range of corrosion thickness gauges is ideal for measuring coating and material thickness as well as for locating pits, flaws and defects in materials.
The Elcometer CG100 ultrasonic corrosion thickness gauge is available in four models - from an entry level CG100B to the top of the range CG100ABDL+.
Features:
|
CG100 Corrosion Thickness Gauges
Technical Specification
Model & Part Number |
CG100B |
CG100BDL |
CG100ABDL |
CG100ABDL+ |
Material thickness digits display |
■ |
■ |
■ |
■ |
B-Scan cross sectional display |
■ |
■ |
■ |
■ |
Combined B-Scan and digits display |
■ |
■ |
■ |
■ |
Scan bar display |
■ |
■ |
■ |
■ |
Coating thickness display |
■ |
■ |
■ |
■ |
A-Scan Display |
|
|
+ Rectified, - Rectified, |
+ Rectified, - Rectified, |
Measurement Mode |
PE, PETP (Temp Compensation), |
PE, PETP (Temp Compensation), |
PE, PETP (Temp Compensation), |
PE, PETP (Temp Compensation), |
Measurement Rate |
4 readings per second |
4 readings per second |
4 readings per second |
4 readings per second |
Measuring Range |
PE: 0.63 - 508mm |
PE: 0.63 - 508mm |
PE: 0.63 - 508mm |
PE: 0.63 - 508mm |
Measurement Accuracy |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
± 1% or ±0.1mm |
Measurement Resolution |
0.01mm (0.001 inches) |
0.01mm (0.001 inches) |
0.01mm (0.001 inches) |
0.01mm (0.001 inches) |
Velocity Calibration Range |
1250 - 13,995m/s |
1250 - 13,995m/s |
1250 - 13,995m/s |
1250 - 13,995m/s |
Additional Features: |
■ |
■ |
■ |
■ |
Differential mode |
■ |
■ |
■ |
■ |
Limit alarm mode |
■ |
■ |
■ |
■ |
B-Scan display speed |
15 seconds per screen |
15 seconds per screen |
Adjustable display speed |
Adjustable display speed |
Flaw mode |
|
|
Basic prove-up flaw detection using single element angle beam transducers |
Basic prove-up flaw detection using single element angle beam transducers |
Calibration setups |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
6 factory & 64 user-definable setups transferrable to and from a PC archive |
Gates |
|
|
3 fully adjustable gates: start, stop, width & threshold |
3 fully adjustable gates: start, stop, width & threshold |
Damping |
|
|
|
Adjustable; impedance matching for optimising transducer performance |
Pulser type |
Dual square wave pulsers up to 140Hz pulse repetition rate |
Dual square wave pulsers up to 140Hz pulse repetition rate |
Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration |
Dual 200 volt square wave pulsers with adjustable pulse width |
Gain |
Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi |
Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi |
Manual, automatic gain control (AGC) with 110dB range (limited) |
Manual, automatic gain control (AGC) with 110dB range (limited) |
Timing |
Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer |
Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer |
Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer |
Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer |
Data logging |
|
|
|
|
Calibration Options |
Single, two point, velocity & material type |
Single, two point, velocity & material type |
Single, two point, velocity & material type |
Single, two point, velocity & material type |
Transducer Probe Type |
Dual element |
Dual element |
Dual element & flaw prove up |
Dual element & flaw prove up |
Transducer Frequency Range |
1 - 10MHz |
1 - 10MHz |
1 - 10MHz |
1 - 10MHz |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch