Máy đo độ dày ăn mòn Elcometer CG70ABDL (B-scan, A-scan, đo qua lớp sơn)
Hãng sản xuất: ELCOMETER Model: CG70ABDL - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
Chế độ đo: PE, EE
Màn hình A-scan: Điều chỉnh +, điều chỉnh -, hiển thị dạng sóng đầy đủ
Tốc độ đo:
+ Bằng tay: 4 giá trị đọc mỗi giây
+ Chế độ scan: 32 giá trị đọc mỗi giây
+ Hiển thị thanh scan: 6 giá trị đọc mỗi giây
Thang đo:
+ PE: 0.63 - 254mm
+ EE: 1.27 - 102mm
Độ chính xác: ± 1% hoặc ±0.1mm
Độ phân giải: 0.01 mm
Dải hiệu chuẩn tốc độ: 1250 - 9,999m/s
Tốc độ hiển thị B-Scan: 15 giây mỗi màn
Ghi dữ liệu: 12000 giá trị đọc
Kiểu đầu dò: Dual element
Dải tần số đầu dò: 1 - 10MHz
Màn hình: 1/8 inch VGA
Đơn vị đo: mm hoặc inch
Kiểu pin: 3 pin kiềm AA
Thời lượng pin: 200 giờ
Nhiệt độ hoạt động: -10 đến 60ºC
Kích thước (w x h x d): 63.5 x 165.0 x 31.5mm
Trọng lượng: 383 g
Giao tiếp RS232
Danh sách đóng gói: Máy chính, chất tiếp âm, hộp cứng, hướng dẫn sử dụng, chứng nhận kiểm tra, 3 pin AA, phần mềm, cáp truyền dẫn
CG70 Corrosion Thickness Gauges
The CG70 range of corrosion thickness gauges with its large, easy to read display, provides users with A and B-Scan options for accurate interpretation of measurements.
The Elcometer CG70 corrosion thickness gauge is available in two models: CG70BDL and CG70ABDL. Both models offer 2D cross sectional block view, providing a graphical representation of a materials thickness, ideal for accurate analysis and identification of pits and corroded areas.
Features:
|
Model & Part Number |
CG70BDL |
CG70ABDL |
Material thickness digits display |
■ |
■ |
B-Scan cross sectional display |
■ |
■ |
Combined B-Scan and digits display |
■ |
■ |
Scan bar display |
■ |
■ |
A-Scan display |
|
+ Rectified, - Rectified, Full Waveform (RF) |
Measurement Mode |
PE & EE (ThruPaint™) |
PE & EE (ThruPaint™) |
Measurement Rate |
|
|
Measuring Range1 |
PE: 0.63 - 254mm (0.025 - 9.999 inches) |
PE: 0.63 - 254mm (0.025 - 9.999 inches) |
Measurement Accuracy1 |
± 1% or ±0.1mm whichever is the greater |
± 1% or ±0.1mm whichever is the greater |
Measurement Resolution |
0.01mm (0.001 inches) |
0.01mm (0.001 inches) |
Velocity Calibration Range |
1250 - 9,999m/s (0.0492 - 0.3937in/μs) |
1250 - 10,000m/s (0.0492 - 0.3936in/µs) |
High speed scan mode |
■ |
■ |
Differential mode |
■ |
■ |
Limit alarm mode |
■ |
■ |
B-Scan display speed |
15 seconds per screen |
15 seconds per screen |
Flaw mode |
|
Basic prove-up flaw detection using |
Calibration setups |
6 factory & 64 user-definable setups |
6 factory & 64 user-definable setups |
Gates |
|
• PE: 1 gate; EE: 2 gates, 1 gate with hold off |
Pulser type |
Square wave pulser |
Square wave pulser with adjustable |
Gain |
PE: selectable low, medium or high gain |
Manual or automatic gain control (AGC) with |
Timing |
20MHz with ultra low power 8 bit digitizer |
20MHz with ultra low power 8 bit digitizer |
Data logging |
• 12,000 readings with waveform |
• 12,000 readings with waveform |
Calibration Options |
Single, two point, velocity & material type |
Single, two point, velocity & material type |
Transducer Probe Type |
Dual element |
Dual element |
Transducer Frequency Range |
1 - 10MHz |
1 - 10MHz |
Transducer recognition |
Manual - selectable from a list |
Manual - selectable from a list |
V-path / dual path error correction |
Automatic |
Automatic |
Probe zero |
Manual (via integrated probe disk) |
Manual (via integrated probe disk) |
Display |
1/8" VGA (greyscale) |
1/8" VGA (greyscale) |
Units (selectable) |
mm or inches |
<p align="center" style="margin-bottom:0in;margin-bottom:.0001pt; text-align:center;line-height:n |
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch