emin

Máy đo độ dày vật liệu bằng siêu âm Elcometer MTG8BDL-TXC (500mm, ghi dữ liệu, đo qua lớp sơn, IP54)

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Hãng sản xuất: Elcometer
Model: MTG8BDL-TXC
Xuất xứ: Anh
Bảo hành: 12 tháng

Chế độ đo: Pulsed-Echo (P-E)
Hiệu chuẩn cho phép đo duy nhất trên thép
Cấp bảo vệ IP (chống nước, chống bụi): IP54
Tốc độ đo: 4, 8, 16Hz
Dải đo độ dày:  P-E: 0.63-500mm, E-E: 2.54 - 25.40mm
Độ chính xác đo: ±1% hoặc ±0.05mm
Các đơn vị đo: mm hoặc inch, m/s, in/µs
Độ phân giải: Thấp:  ie 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs; Cao:  ie 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs
Đầu ra dữ liệu: USB, bluetooth kết nối tới PC
Ghi dữ liệu: có
Kiểu đầu dò: Dual element
Kiểu pin: 2xAA
Thời lượng pin: Alkaline: 15 giờ; Lithium: 28 giờ
Nhiệt độ hoạt động: -10 đến 50°C
Kích thước (w x h x d): 145x73x37mm
Trọng lượng (bao gồm pin): 210 g
Danh sách đóng gói: Elcometer MTG8BDL,  đầu dò góc phải 5 MHz 1/4, chất tiếp âm, dây cổ tay, 3 bảo vệ màn hình, hộp bảo vệ, hộp chuyển bằng nhựa, 2 pin AA, chứng nhận hiệu chuẩn của nhà sản xuất, Cáp USB, phần mềm Elcometer, hướng dẫn sử dụng

Manual

Datasheet

Datasheet Transducer

MTG8 Material Thickness Gauge

The MTG8 is the top of the range gauge with all the features and functionality necessary for measuring material thickness and velocity on virtually any material and for a wide range of applications.

As well as all the features of the MTG2, MTG4 and MTG6, the MTG8 allows users to store into memory up to three calibrations. Once saved the user can select a calibration memory without the need to re-calibrate the gauge, ideal for users who are measuring a variety of materials or thicknesses.  Using the gauge alpha-numeric function, calibration memories can be re-named to suit the calibration setting.

Statistics

The MTG8 has user definable upper and lower limits with audible and visual pass/fail warnings. Limits can be set for individual readings or for each batch.  If a measurement is taken which falls outside set limits, the reading value and the limit icon turn red, the red LED flashes and the alarm beeps providing immediate indication of problem areas.

Display Mode

The MTG8 has Differential Mode; once a user defined nominal thickness value is set, the gauge displays the measured thickness together with the variation from the set nominal value thus indicating areas of the material which are thinner or thicker than expected.

The MTG8 offers B-Scan, a time based, cross sectional 2 dimensional graphical view of the material under test, ideal for relative depth analysis. The zoom of the B-Scan reading can either be set to automatic or can be defined by the user to focus on areas of interest.

Data Logging

The MTG8 can store 100,000 readings in up to 1,000 sequential or grid type batches. Using grid batching, readings are stored in a spreadsheet type format. The Obst feature, allows the user to record an obstruction within the grid.

Data Output

Compatible with ElcoMaster®, PC & Mobile App, readings can be downloaded via USB or Bluetooth® to PC, iOS or Android™ devices for further analysis and reporting.

 

MTG8 Material Thickness Gauge

mfi logo

Features:

  • Pulsed-Echo (P-E), Echo-Echo ThruPaint™ & Velocity (VM) measurement modes
  • 2-Point, 1-Point, Material, Velocity, Thickness Set and Factory calibration options
  • Three user programmable calibration memories
  • User selectable measurement rate; 4, 8, 16 readings per second
  • User selectable reading resolution; 0.1mm (0.01”) or 0.01mm (0.001”)
  • Scan Mode
  • Readings, Selected Statistics, Bar Graph, Run Chart, B-Scan & Differential Mode
  • Gauge memory; stores 100,000 readings in up to 1,000 sequential or grid batches
  • User definable upper and lower limits with audible & visual pass/fail warnings
  • USB and Bluetooth® data output to ElcoMaster® and ElcoMaster® Mobile App


 

Pulsed Echo (P-E) Measurement Mode Echo Echo (E-E) Measurement Mode Velocity Mode (VM) Measurement Mode Measurement Rate of 4Hz Measurement Rate of 8Hz Measurement Rate of 16Hz B-Scan Display Mode

 

Manual

Datasheet

Datasheet Transducer

MTG8 Material Thickness Gauge

The MTG8 is the top of the range gauge with all the features and functionality necessary for measuring material thickness and velocity on virtually any material and for a wide range of applications.

As well as all the features of the MTG2, MTG4 and MTG6, the MTG8 allows users to store into memory up to three calibrations. Once saved the user can select a calibration memory without the need to re-calibrate the gauge, ideal for users who are measuring a variety of materials or thicknesses.  Using the gauge alpha-numeric function, calibration memories can be re-named to suit the calibration setting.

Statistics

The MTG8 has user definable upper and lower limits with audible and visual pass/fail warnings. Limits can be set for individual readings or for each batch.  If a measurement is taken which falls outside set limits, the reading value and the limit icon turn red, the red LED flashes and the alarm beeps providing immediate indication of problem areas.

Display Mode

The MTG8 has Differential Mode; once a user defined nominal thickness value is set, the gauge displays the measured thickness together with the variation from the set nominal value thus indicating areas of the material which are thinner or thicker than expected.

The MTG8 offers B-Scan, a time based, cross sectional 2 dimensional graphical view of the material under test, ideal for relative depth analysis. The zoom of the B-Scan reading can either be set to automatic or can be defined by the user to focus on areas of interest.

Data Logging

The MTG8 can store 100,000 readings in up to 1,000 sequential or grid type batches. Using grid batching, readings are stored in a spreadsheet type format. The Obst feature, allows the user to record an obstruction within the grid.

Data Output

Compatible with ElcoMaster®, PC & Mobile App, readings can be downloaded via USB or Bluetooth® to PC, iOS or Android™ devices for further analysis and reporting.

 

MTG8 Material Thickness Gauge

mfi logo

Features:

  • Pulsed-Echo (P-E), Echo-Echo ThruPaint™ & Velocity (VM) measurement modes
  • 2-Point, 1-Point, Material, Velocity, Thickness Set and Factory calibration options
  • Three user programmable calibration memories
  • User selectable measurement rate; 4, 8, 16 readings per second
  • User selectable reading resolution; 0.1mm (0.01”) or 0.01mm (0.001”)
  • Scan Mode
  • Readings, Selected Statistics, Bar Graph, Run Chart, B-Scan & Differential Mode
  • Gauge memory; stores 100,000 readings in up to 1,000 sequential or grid batches
  • User definable upper and lower limits with audible & visual pass/fail warnings
  • USB and Bluetooth® data output to ElcoMaster® and ElcoMaster® Mobile App


 

Pulsed Echo (P-E) Measurement Mode Echo Echo (E-E) Measurement Mode Velocity Mode (VM) Measurement Mode Measurement Rate of 4Hz Measurement Rate of 8Hz Measurement Rate of 16Hz B-Scan Display Mode

 

 

MTG8 Material Thickness Gauge

Technical Specification

Part Number (with Transducer)1

MTG8BDL-TXC

Part Number (gauge only)

MTG8BDL

Easy to use menu structure in multiple languages

Tough, impact, waterproof and dust resistant equivalent to IP54

Bright colour screen with permanent backlight

Ambient light sensor, with adjustable brightness

Scratch and solvent resistant display; 2.4" (6cm) TFT

Large positive feedback buttons

USB power supply via PC

Gauge software updates2 via ElcoMaster® Software

2 year gauge warranty3

Limits: 40 definable audible & visual pass/fail warnings

Measurement Mode

 

Pulsed Echo (P-E)

Echo-Echo ThruPaint™ (E-E)

Velocity Mode (VM)

Measurement Rate

4, 8, 16Hz4

Thickness Range5

 

P-E: 0.63-500mm (0.025-20")

E-E: 2.54 - 25.40mm (0.100-1.00")

Measurement Accuracy6

±1% or ±0.05mm (0.002")

Measurement Units

 

mm or inches

m/s, in/µs

Repeatability / Stability Indicator

Display Mode:

 

Reading

Selected statistics

Scan thickness bar graph

Run Chart

Readings and Differential

B-Scan cross sectional display

Selectable Reading Resolution

 

Lo; ie 0.1mm, 0.01 Inch, 10m/s, or 0.001 in/μs

Hi; ie 0.01mm, 0.001 Inch, 1m/s, or 0.0001 in/μs

Statistics

 

Number of readings, n, mean average, ẋ, standard deviationσ

Lowest reading, Lo; Highest reading, Hi

Low high limit value

Reading Range Value

Nominal Value

Number of readings below low limit

Number of readings above high limit

Calibration Options

 

Zero (using the integral zero disc)

1 - point

2 - point

Material selection; 39 preset materials

Factory; resets to the factory calibration

Velocity (speed of sound)

Known thickness value

Calibration Features

 

Calibration lock: with optional PIN Lock

Test calibration feature

<p class="MsoNormal" style="mso-margin-top-alt:auto;mso-margin-bottom-alt:auto; margin-left:22.5pt


Đăng ký nhận bản tin - cơ hội nhận khuyến mãi