Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Range/ Measuring range (STD setting range)/ Measuring current/ Accuracy
100Ω/ 10Ω～ 99Ω/ 10mA～ 100mA/ ±0.2％±1digit
1kΩ/ 100Ω～ 990Ω/ 5mA～ 50mA/ ±0.2％±1digit
10kΩ/ 1kΩ～ 9.9kΩ/ 0.5mA～ 5mA/ ±0.2％±1digit
100kΩ/ 10kΩ～ 99kΩ/ 500μA～ 0.5mA/ ±0.2％±1digit
1MΩ/ 100kΩ～990kΩ/ 5μA～ 50μA/ ±0.2％±1digit
10MΩ/ 1MΩ～ 10MΩ/ 0.5μA～ 5μA/ ±0.3％±1digit
Measuring voltage: 1～10V
WIP. R Measurement (Rc/ENR/CRV)
Range: 100Ω/ 1kΩ/ 10kΩ/ 100kΩ/ 1MΩ/ 10MΩ
Measuring range: Against STANDARD 0.0%～19.9%
Accuracy:
[Rc] ±0.3%±1digit
[ENR] ±2.0%±1digit
[CRV] ±0.5%±1digit
※Under 1.0% of the measured indication value for ENR/CRN is not targetted the measuring accuracy
Measuring time
Measuring item/ External start time/ Measure by "Free run"
ΔTR/ about 23.5msec/ about 21 times per second
ΔTR✢Rc/ about 43msec/ about 15 times per second
ΔTR✢Rc✢ENR/CRV/ Above time ✢ noise measuring time ※1/ Above time ✢ noise measuring time ※2
※The above measurement time is in a case of zero setup fot DELAY TIME on each range. The setup for each range is available up to 99msec.
※1 Noise measuring time (ENR/CRV), arbitrary time to operate the wiper from the second start to the stop signal.
※2 The setup time for sample time (SPL) of parameter setup item is to be a measuring time of (ENR/CRV) Default: 2 seconds
Completion of the measurement signal (EOC) Pulse width: 1msec.～199msec. [000] Continuous Output when setting
Measuring method: 4-terminal measurement
Comparator setting range: ΔTR：✢LIMIT ✢0.0%～✢99.9% －LIMIT －0.0%～－99.9% Rc, ENR, CRV：✢LIMIT ✢0.0%～✢19.9%
Operation condition [Temp.]: +5*C～+40*C [Humidity] less than 85％
Power supply: AC100V～240V
selectable, 50/60Hz, about 30VA
Outer dimension: about 333 (W) ×99 (H) ×300 (D) mm (excluding protruding parts such as rubber legs, etc.)
Weight: about 4kg
