Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Viscosity range: up to 3,000 mPa•s at ambient and measuring temperature¹
Filling mode: with peristaltic pump:
Suction mode in one direction
Suction mode with pumping back and forth at the beginning
Typical time for filling and measuring cycle: 2 to 5 minutes
Minimum sample volume: approx. 10 mL to 20 mL
Compressed air supply: max. 2 bar (29 psi) relative
Quality of air necessary: Class 3 according to ISO 8573-1:
max. particle size: 5 μm
max. pressure dew point: –20 °C (–4 °F)
max. oil content: 1 mg/m³
Environmental conditions (EN 61010): indoor use only
Operating temperature: +15 °C to +35 °C (+59 °F to +95 °F)
Pollution degree: 2
Over voltage category: II
Altitude: max. 3,000 m (9,840 ft)
Power supply: supplied by the master instrument
AC power supply voltage according to technical data plate at the rear of the master instrument (protective grounding required)
Dimensions excl. master instrument (L x W x H): 205 mm x 148 mm x 205 mm (8.1 in x 5.8 in x 8.1 in)
Weight excl. master instrument: approx. 3.8 kg (8.4 lbs)
¹ Recommended for samples with a viscosity up to 500 mPa•s at ambient and measuring temperature. For samples with a viscosity higher than 500 mPa•s at ambient and measuring temperature, bubbles may occur during filling.
