Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
PP simulation: Open NC, 13A , 20A, 32A, 63A - selection via rotary switch
CP status: A, B, C, D
CP/PE error: 3 buttons on side for error simulation; CP/PE or diode short-circuit and opening of PE
Earth fault PE error: PP switch position NC
Protection / Admissible overload: 600 Vrms
Outputs
L1/L2/L3/N and PE measurement terminals: 230 V single-phase and 400 V three-phase 50 Hz, 5 sockets with 4 mm diameter for connection of the installation tester,
equipped with banana plugs
SCHUKO-type mains socket (earth provided by the 2 studs on the inner edges): Max 250 V, CAT II 300 V, admissible current 10 A (fuse)
CP signal terminal: PWM +/-12V communication protocol
Specifications
Input voltage: 230 V/400 V AC 50/60 Hz 10 A
EVC-20 charging-station socket connector with protective cover: Charging mode 3 adapted to IEC 62196-2 type 2 socket or fixed cable with connector for type 2 vehicle, three-phase
Power socket protection: Fuse T 10 A/250 V
General Specifications
LEDs: X3 - blue
Electric vehicle standards - Installation: IEC 61851-1 / IEC 60364-7-722
Safety: EN 61010-1, pollution degree 2, CAT II 300V
IP: IP 20 as per IEC 60529
Connection socket: Type 2 32 A 3PH+N+PE type E2201 200/346 V
Dimensions / weight: Casing dimensions 150x83x77 mm / Weight: 850 g
Option: CA.6117
