Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
System: Balanced Temperature Control system (BTC system)
Performance:
Temperature range: −70 to ＋180℃ (−94 to ＋356℉)
Allowable heat load: 8 kW (−20℃ or more)
Inside dimensions: W800 × H500 × D400 mm
Outside dimensions: W1000 × H1808 × D1915 mm
Capacity: 160 L
Weight: 950 kg
Utility requirements:
Allowable ambient conditions: ＋5 to ＋35℃ (＋41 to ＋95℉)
Power supply: 380V AC 3φ 50Hz, 61A
Cooling water supply pressure: 0.2 to 0.5 Mpa (2 to 5 kg/cm2G)
Cooling water supply rate: 4100L/h (at reference water temp. ＋25℃)
Piping connection size: Carbon steel pipe, ID 32 mm (drain and supply)
Operating cooling water temp. range: ＋5 to ＋32℃ (＋41 to ＋89.6℉)
Accessories
• Flat cable port rubber plug (Silicone sponge rubber): 2
• Specimen basket: 2 (18-8 Cr-Ni stainless steel: 5 mesh per inch)
W700×H40×D346 mm/ load capacity 5kg
• Shelf brackets (7 positions available, pitch 60mm): 4
• Cartridge fuse:
200V AC
Type B, 250V 6A: 1
250V 4A: 1
220V AC, 380V AC, 400V AC
Type B, 250V 4A: 1
250V 5A: 1
250V 6A: 1
• Specimen temperature measuring thermocouple:1
• Specimen temperature input connector: 1
• Strainer R11/4 in. (32A): 1
• Nipple R11/4 in. (32A): 1
• Strainer element (#30 mesh): 1
• Operation manual: 1 set
• Warranty card: 1
*Power cable is optional, not equipped as standard fitting.
Datasheet:
