Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Output power:
+ DP160LS: single-phase 16 kVA
+ Poly-phase system: Configure single-phase three-wire by two units, Configure three-phase four-wire by three units
AC / DC mode: AC, ACDC, DC (single-phase only)
Output voltage and frequency:
+ AC Voltage: 0 V to 160 V (100V range ); 0 V to 320 V ( 200V range ); Resolution: 0.1 V
+ AC Frequency: AC: 40.00 Hz to 550.00 Hz; ACDC: 1.00 Hz to 550.00 Hz; Resolution: 0.01 Hz
+ DC Voltage: −227 V to +227 V (100V range ); −454 V to +454 V ( 200V range ); Resolution: 0.1 V
Max. current (100 V range / 200 V range): DP160LS: 160 A / 80 A
Max. peak current: DP160LS: Four times of the max. current
Short reverse power flow: Less than 100% of max. current (RMS) (reverse power flow time ≤ 20 ms, discontinuous, less than 40°C)
Fluctuation with output current (100 V range / 200 V range): Within ±0.15 V / ±0.30 V (In the case that the output current is changed from 0% to 100% of the max. current. DC or 45 Hz to 65 Hz.)
Distortion of output voltage waveform: 0.5% or lower (40 Hz to 550 Hz)
Power Input (specified on order) : Overvoltage category Ⅱ; 3P3W AC200 V to 220 V ±15% or 3P4W AC380 V ±15%, 50 Hz / 60 Hz ±2 Hz, power factor 0.90 or higher (typ.), efficiency 77% or higher (typ.), max. power consumption
+ DP160LS: 24 kVA or lower
Measurement function: RMS / peak / average values of the output voltage / current, current peak-hold values, active / apparent / reactive power, the power factor, the crest factor, and harmonic current (40th max.), synchronization frequency
Variable current limiter: Effective value, positive / negative peak value
Remote sensing, AGC (automatic gain control), Autocal (output voltage compensation)
Sequence function, voltage fluctuation testing function, clipped sine wave, arbitrary waveform
Power unit energization setting:
+ External control I/O: Used to control voltage dip simulator and reference impedance network
+ Interface: Standard: RS-232. USB; Selectable: GPIB or LAN
+ Control Software: Enables control of basic parameters for output via a PC, including data logging, and creating/editing of sequence, simulation and arbitrary waveforms
+ Dimensions (mm): DP160LS: 455 (W) × 1407 (H) × 803 (D) mm
+ Weight (approx.): DP160LS: 230 kg ,DP420LS: 600 kg
