Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Corrosion-proof Test Chamber
Inner dimensions: mm 914 x 610 x 914 h
Wide door and window for clear observation during the tests – with shutter curtain
Two windows of optical glass D 75 mm vertically aligned
The lower window is heated to about 50 °C and rigidly connected to the upper window by means of three stainless steel rods D14
Temperature sensor mounted in the center of the rear wall
On the upper wall quick connection for any Gas Sampling Analysis
Photometric system
Light source: incandescent lamp 6.5 V, powered at 4.2 Volts stabilized
Optics for collimated beam diameter of 51 mm
Photo detector: Photo multiplier Hamamatsu with spectral response S-4 low dark current
Removable attenuation filter ND 22 and fixed compensation filter
Shutter
Transmittance measuring range 100 / 0.00001 – auto scale
Automatic zero-setting
Furnace
Cone-shaped furnace
Allowing an adjustable radiation in the range 10/50 Watt/cm²
Pressure gauge, control of the pressure inside the chamber and overpressure discharge when needed
Radiometer
Pipe type
Calibration Certificate traceability to NIST
Accommodation for cooling and reading in millivolts and kW / sqm
Fume discharge pneumatically-operated, complete with centrifugal fan
Fume drawing connections on the upper part of the chamber, to allow gas toxicity analysis according to AITM 2.0007
Complete test requires the use of dedicated equipment (see optional accessories)
Control Panel
Indication machine status – display 7” color
Main switch thermomagnetic
Source to turn
Open / close interior
Flow air and propane with needle valve adjustment
Gas ignition button
Vacuum cleaner power switch
Data Acquisition 24-bit – USB output
Software DATA Link for data processing and all opening and closing valves functions, specimen positioning, beam calibration, as well as automatic performance of the test
USB output for connection to PC and printer
Supply requirements
Air: dry, filtered, 3 bar
Propane gas: 0.5 bar
Power: 230 V 800VA stabilized
