Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
CMRR: >120 dB @ 60 Hz
Width: 92 mm
Height: 45 mm
Length: 182 mm
Accuracy: ± 0.5 °C
Software: DASYLab®, and LabVIEW®
Bandwidth: DC to 1 MHz
Isolation: 500V from PC
Input Type: Thermocouple, Voltage
Digital Input: Digital: Low <1.3 Vdc
Output Signal: Digital
Sampling Rate: 80 Hz (80 updates/second)
A/D Conversion: 22-Bit A/D
Data Interface: Ethernet
Supply Voltage: 6 to 16 Vdc
Analog I/O Note: Analog Input Note: Analog Specifications;Each channel is configurable for single-ended or differential, Volts, or thermocouple inputs;Thermocouple Accuracy;In very slow mode, 22 bit resolution, includes cold junction compensation error;J (±1.1°C), K (±1.2°C), T (±1.1°C); E (±1.0°C), R (±2.5°C), S (±2.6°C), B (±3.3°C), N (±1.5°C);Cold Junction Compensation Accuracy: (±0.5°C),;Over-Voltage Protection: ±45 V relative to analog Lo;AC Common Mode Rejection: >120 dB @ 60 Hz;Channel-to-Channel Crosstalk: <-120 dB (DC to 100 Hz);;Accuracy;OMB-DAQ-55/56: 0.015% of reading +0.002% of range (exclusive of noise);Input Resistance: >10 M Ohm (SE), >20 M Ohm (DE);Bias Current: <1 nA (0-35°C)
Digital I/O Note: Digital Output Maximum Switch Voltage:0 to +15 Vdc (20 V for <1 minute) Maximum Switch Current: 150 mA/output continuous, 500 mA/output peak (<100 µs),150 mA total continuous (per bank of 8 outputs) Output Resistance: 10 Ohms max;Cross talk: <-120 dB (DC to 100 Hz);Sink Current: 150 mA
Input Resistance: >10 MΩ (SE), >20 MΩ (DE)
Pull-up Resistor: 27 KΩ to 5V for Switch or Relay Sensing
Output Resistance: 10 Ω
Relative Humidity: 0 to 95% RH non-condensing
Supply Power Note: Powered from USB, or from external 6 to 16 Vdc when used with a bus powered hub
Supply Power Type: DC/USB
Data Interface Note: Supported Operating System: Microsoft Windows®XP SP2 / VISTA/7
Input Configuration: Connected Software
Configuration Parameters: Open-Collector Driver, Schmitt-Trigger Input, User-Configurable Input/Output
Number of Channels, Input: Analog: 5 DE, 10 SE, Frquency/Pulse: 2, Digital: 8
Voltage Measurement Range: ±20V, -10 to 20V, ±10V, ±5V, ±4V, ±2.5V, ±2V, ±1.25V, ±1V, ±625 mV, ±500 mV, ±312 mV, ±250 mV , ±156 mV , ±125 mV, ±62 mV, ±31 mV, Differential, Single ended
Number of Channels, Output: Digital: 8
Operating Temperature, Max: 50 °C
Operating Temperature, Min: 0 °C
