Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Specifications：
PCB dimension: W20*D20~W600*D500mm
PCB thickness: 0.5~4mm
Placement precision: ±0.02mm
Working table adjustment: ±10mm forward/backward, ±10mm left/right
Temperature control: K-type thermocouple, close loop controlled
PCB locating way: Outer or jig
Preheater: far infrared, 6000W
Upper heater: hot air, 1000W
Lower heater: hot air, 1000W
Power supply: single-phase 380V, 50/60Hz, 10KW
Machine dimension: L1350*W800*H1800mm
Air supply: 5~8kgf/cm, 8L/min
Weight: Appox. 180kg
Features：
Hot air head and mounting head are designed 2 in 1, and, can store 5,0000 groups
of working locations,with the function of auto soldering and mounting;
Driven by X and Y axes step motor, operated with rocker bar ,
micro-movable when approaching the destination;able to store unlimited data;
able to automatically suck BGA for soldering; after that, automatically place BGA to designated location;
Color optical system with functions of split vision, zoom-in and micro-adjustment,
equipped with abbreviation detection device, auto focus, software operation,
30X optical focus, able to rework BGA sized up to 70mm×70mm;
Embedded industrial computer, touch screen interface, PLC control,
real-time temperature curve display, able to display set curves and 9 detecting curves at the same time;
Color LCD monitor;
Suction nozzle can identify automatically material and mounting height,
can constrain the pressure within a small range of 30~50g;
Connected with nitrogen outside for nitrogen-protected soldering and desoldering;
Build-in vacuum pump, 360° rotation in Φ angle; mounting nozzle is micro-adjustable;
The supports rock can be adjusted to restrain the local sinkage of the BGA soldering area;
8 segments of temperature up (down) and 8 segments constant temperature control,
5,0000 groups of temperature curve are stored, connected with computer, unlimited storage of curves;
curve analysis can be carried out on the touch screen, comparing with the history saved curves;
with computer communication function, communication software is attached;
Three independent heating areas, temperature and time can be displayed digitally on the touch screen,
can rework CGA;
Both upper and lower hot-air heating heads are movable on the IR preheating area to fit for reworking BGA
in different positions on PCB;
Control independently through external computer, and finish all functions;
Large IR pre-heating from the bottom will heat the PCB evenly to avoid deformation and keep soldering effect;
heating board is independently controlled;
Equipped with different alloy hot air nozzles, easy to replace, be able to locate in any angle.
