Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
1. FPGA Device
Cyclone V GX 5CGXFC5C6F27C7N Device
77K Programmable Logic Elements
4884 Kbits embedded memory
Six Fractional PLLs
Two Hard Memory Controllers
Six 3.125G Transceivers
2. Configuration and Debug
Quad Serial Configuration device – EPCQ256 on FPGA
On-Board USB Blaster (Normal Type-B USB connector)
JTAG and AS mode configuration supported
3. Memory Device
4Gb LPDDR2 x32 bits data bus
4Mb SRAM x16 bits data bus
4. Communication
UART to USB
5. Expansion I/O
HSMC x 1(voltage levels: 2.5V), including 4-lanes 3.125G transceiver
2x20 GPIO Header (voltage levels: 3.3V)
Arduino header, including analog pins
SMA x 4 (DNI), one-lane 3.125G transceiver
6. Display
HDMI TX, compatible with DVI v1.0 and HDCP v1.4
7. Audio
24-bit CODEC, Line-in, line-out, and microphone-in jacks
8. Switches, Buttons, LED, and 7-Segments
18 LEDs
10 Slide Switches
4 Debounced Push Buttons
1 CPU reset Push Buttons
Four 7-Segments
9. Micro SD Card Socket
Provides SPI and 4-bit SD mode for SD Card access
10. ADC
12-Bit Resolution, 500Ksps Sampling Rate. SPI Interface.
8-Channel Analog Input. Input Range : 0V ~ 4.096V.
11. Power
12V DC input
12. Kit contents
Cyclone V GX Starter Kit board
Cyclone V GX Starter Kit Quick Start Guide
Type A to B USB Cable
Power DC Adapter (12V)
