Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Operating Mode: Constant Current
Laser Pin Codes: All (A through H)
Supply Voltage: 4.5 V to 5.5 V
Laser Current
Current Range: 0 mA to 200 mA
Compliance Voltage: 3.0 V (Max) (For 5 V Supply Voltage)
Accuracy: ±(2% + 1 mA) [Typical] (Full Scale; After 10 Minute Warm-Up)
Repeatability: ±0.1% (Full Scale)
Noise: 12 µA (RMS) (10 Hz to 10 MHz; Measured with a 10 Ω Resistor)
Drift: 20 µA (30 Minutes, 0 to 10 Hz, Tamb = 25 °C
Temperature Coefficient: 100 ppm/°C
Laser Current Setpoint and Modulation
Input Impedance: 1 MΩ
Input Voltage Range: 0 V to 2.5 V
Input Voltage Offset: 90 mV (Typical)
Modulation Bandwidth: DC to 100 kHz (3 dB; Measured with a 10 Ω Resistor)
Modulation Coefficient: 80 mA/V ± 5%
Laser Current Reference Output
Laser Current Coefficient: 1 mV/mA (For 1 Ω Resistor in Series)
Measurement Accuracy: 1% (For ≥10 kΩ Load)
Physical Data
Operating Temperature: -20°C to +70°C (Non-Condensing)
Storage Temperature: -40°C to +100°C (Non-Condensing)
Warm-Up Time for Rated Accuracy: 10 Minutes
Dimensions of SMT Package: 17.0 mm × 10.0 mm × 2.8 mm
Dimensions of Daughterboard with SMT Package: 38.0 mm × 19.0 mm × 12.9 mm (MLD203CHBE and MLD203CLNE Only)
Weight: 1.0 g
All technical data are valid at 23 ± 5°C and 45 ± 15% relative humidity (non-condensing).
