Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
1.Base materials
Corrosion aluminum foil
Width: 50～320mm
Thickness: 15～50um
Areal density: 27～135g/m2
Copper foil
Width: 550～320mm
Thickness: 6～20um
Areal density: 53～178g/m2
2.Coating methods
1)Comma roll + microgravure coating
2)Comma roll: Continuous & Intermittent, microgravure: Continuous, can be set on the touch screen
3.Baking
1) oven length: 4000mm, 2000mm / section
2) airflow radiation belts and rollers
3) electric heating
4.Machine speed: Max7.5m/min
5.Coating speed: 1～7.5m/min(related to fluid state and the coating thickness )
6.Coating process parameters
1) continuous coating, the coating can be fixed length
2) Min interval length: 5mm
3) Max interval length: 250mm
4) Head and tail thickness control: By controlling the specific point in time to achieve and rubber tire wheel base ratio
7.Coating Precision: ±1.5% (related to the fluid state)
8.Tension range: 15 ~ 50N
9.Rollers width: 350mm
10.Roller diameter: General, 50mm,
11.Wind mouth Width: 350mm
12. NMP recovery system: Optional
13.Matching demand
1) Power distribution: AC220V, 50 / 60HZ, Max20KW, grounding resistance ≤10Ω
2) Machine size: Machine size:L x W x H = 3.5*1.2*1.5M
3) Compressed air: Maximum pressure not less than 0.5MPa
4) Exhaust emissions
Reserve at least 400 * 400mm
Or 400mm diameter exhaust outlet four
