Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts

Input
Connector: BNC or 3-Pin PT02A
Charge Sensitivity: 0.1 to 199.9 pC/g or mV/g with three selectable ranges: “X.1,” “X1,” “X10”
Frequency Response: ±3% from 5 Hz to 40,000 Hz referred to 100 Hz (filters “Out”)
Overload Recovery: 100% overdrive of 1 ms half-sine input causes no effect except clipping
Amplitude Stability vs Temperature: <2% change from 30° to 130°F
Amplitude Stability vs Input Capacity: <0.1% change per 1,000 pF
Shunt Resistance: Operates with any input impedance above 200 kΩ
Filtering — Low Pass
48 dB/oct or greater roll-off
Cutoffs selectable 100 Hz to 20 kHz in 100 Hz steps
Filtering — High Pass
48 dB/oct roll-off
5 Hz to 999 Hz in 1 Hz steps
Acceleration Output
Voltage (max): 10 Vrms
Sensitivity:
203PC-1: 10 mVrms/Pk g
203PC-2: 10 mV/g
Impedance: <25 Ω (10 mA max)
Maximum Capacity FS: 0.033 μF at 20 kHz
Amplitude Linearity: ±1% best straight line
Amplitude Accuracy: ±2% of reading ±1% FS with filter
Noise: 0.05 pC max at 1.0 pC/g sensitivity; increases 0.006 g/1000 pF
Harmonic Distortion: <1%
DC Offset: <10 mV
Connector: 18-Pin PT02A-14-18S and BNC
Velocity Output
Voltage (max): 10 Vrms
Sensitivity:
203PC-1: 100 mVrms/Pk ips
203PC-2: 100 mV ips
Impedance: <25 Ω (10 mA max)
Fullscale Capacity at 2 kHz: 0.33 μF
Frequency Response: ±3% from 25 Hz to 3,000 Hz (–6 dB/oct); plug-in option extends to 5 Hz
DC Offset: <10 mV
Connector: 18-Pin PT02A-14-18S and BNC
Displacement Output
Level: 0 to 10 Vrms
Impedance: <5 Ω
Sensitivity:
203PC-1: 100 mVrms/Pk MIL
203PC-2: 100 mV/MIL (Pk-Pk)
Fullscale Capacity at 2 kHz: 0.33 μF
Frequency Response:
±3% from 30 Hz to 1,000 Hz (–12 dB/oct)
±5% from 25 Hz to 3,000 Hz (–12 dB/oct, with LPF)
DC Offset: <10 mV
Connector: 18-Pin PT02A-14-18S and BNC
DC Output
Level: 13 VDC max
Impedance: <25 Ω (10 mA max)
Sensitivity:
10 or 100 mV/Pk g
0.1 or 1 V/Pk ips or MILS
Linearity: ±1% FS
Amplitude Accuracy:
Accel: ±2% reading ±1% FS
Vel: ±4% reading ±1% FS
Displ: ±5% reading ±1% FS
Dynamic Range: 50 dB below FS (Accel/Vel/Displ)
Connectors: 18-Pin PT02A-14-18S and 3-Pin PT02
FS AC Output (Optional)
Level: 10 Vrms FS
Impedance: <50 Ω (10 mA max)
Configuration: SE or DIFF (jumper JP1)
Linearity: ±1% straight line at 1000 Hz
Connector: Isolated BNC
Controls
High-Pass Filter Switch: 1 to 999 Hz (48 dB/oct Butterworth)
Low-Pass Filter Switch: 0.1 to 19.9 kHz (48 dB/oct) in 100 Hz steps
Variable Pre/Post LPF Adjustment
Mode/Units Switch: pC/g, mV/g, mV/ips, Cal; units AA, AV, AD, VV, VD
Multiplier Range Switch: X.1, X1, X10 for 1.00–19.99 sensitivity
Sensitivity Switch: 1.00 to 19.99 for selected range
FS Switch:
AA: 10, 20, 50, 100, 200, 500 g
AV/AD: 1, 2, 5, 10, 20, 50 ips or MIL
SE-ISO-DIFF Switch (On-Curr-Off)
DIFF BAL Adjustment
ISO Adjustment
In-Line Filter Switch (L/M/H): 5 kHz / 10 kHz / 20 kHz
Indicators
DVM meter: displays g, ips, MILS
Cal Light (Red)
Overload LEDs (Accel / Vel / Displ / DC)
Mode LEDs (Green): pC/g, mV/g, mV/ips
Multiplier LEDs (Yellow)
Power
120 or 240 Vrms, 50–400 Hz, 100 W nominal
Mechanical
Dimensions: 7" H × 2.7" W × 13" D
Up to six units in 19" rack