Get exclusive volume discounts, bulk pricing updates, and new product alerts delivered directly to your inbox.
By subscribing, you agree to our Terms of Service and Privacy Policy.
Direct access to our certified experts
STANDARD WAVEFORMS
- SINE
Frequency Range: 1µHz to 50MHz
Frequency Resolution: 1µHz, 14 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Amplitude Flatness Relative to 1kHz: <100kHz 0.1dB, <5MHz 0.15dB, <25MHz 0.3dB, <50MHz 0.5dB
Harmonic Distortion: ≤1 Vp-p | ≥ 1Vp-p
DC to 20kHz -65dBc -65dBc
20kHz to 100kHz -60dBc -60dBc
100kHz to 1MHz -45dBc -45dBc
1MHz to 25MHz -40dBc -35dBc
25MHz to 50MHz -40dBc -28dBc
Non-Harmonic Spurii: <–60dBc to 1MHz, <–60dBc + 6dB/octave 1MHz to 50MHz
Phase Noise: -115dBc/Hz, typical (10kHz offset)
- SQUARE
Frequency Range: 1µHz to 50MHz
Resolution: 1µHz, 14 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Rise and Fall Times: <8ns
Overshoot: <5%
- RAMP & TRIANGLE
Frequency Range: 1µHz to 1MHz
Resolution: 1µHz, 12 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Linearity Error: <0.1% to 30 kHz
- PULSE
Frequency Range: 500 µHz to 12.5MHz
Resolution: 1µHz , 14 digits
Output Level: 10mVp-p to 10Vp-p into 50Ω
Overshoot: <5%
Edge Range: <8ns to 40µs
Delay Range: 0ns to 2000s
PRBS WAVEFORMS
Sequence Length: 7, 9, 11, 15, 20, or 23 stages (127 to 8,388,607 bit length)
Bit Rate: 1µbps to 50Mbps
Rise/Fall Times: Rise/Fall times can be varied (rise time = fall time).
Edge Range: <8ns to 40µs
OUTPUTS
- Main Output
Output Impedance: 50Ω
Amplitude: 20mV to 20Vp-p open circuit (10mV to 10Vp-p into 50Ω)
Amplitude Accuracy: 2% ±1mV at 1kHz into 50Ω.
DC Offset Range: ±10V. DC offset plus signal peak limited to ±10V from 50Ω.
DC Offset Accuracy: Typically 3% ±10mV.
Resolution: 3 digits or 1mV for both Amplitude and DC Offset
INPUTS
- Trig In
Frequency Range: DC - 1MHz.
Minimum Pulse Width: 50ns
Input Impedance: 10k W
- External Modulation Input (for AM, FM, PM, PWM)
Voltage Range: ± 5V full scale
Input Impedance: 5k W typical
Bandwidth: DC to 20kHz
- Ref Clock Input
Input for an external 10MHz reference clock
Voltage Range: 1Vpp – 5Vpp
Maximum Voltage: +5V
Minimum Voltage: -1V
GENERAL SPECIFICATIONS
AC Supply: AC Input: 100-240VAC ±10% 50/60Hz; 100-120VAC ±10% 400Hz; 60VA max. Installation Category II
Temperature & Environmental: Operating Range: +5ºC to +40ºC, 20% to 80% RH
Storage Range: -20ºC to + 60ºC
Safety & EMC: Safety: Complies with EN61010-1
EMC: Complies with EN61326
Physical: Size: Bench top use (H;W;L): 97mm (2.62”); 250mm (9.84”); 295mm (11.62”).
Rack mounted use (H;W;L): 86.5mm (3.4”); 213.5mm (8.4”); 69mm (10.59”); i.e. ½-rack x 2U.
Weight: 2.7 kg (5.95 lbs)
OPTIONS
- Rack Mount (RM200A): 19 inch 2U rack mount suitable for one or two generators.
- GPIB Interface (Option TG-GPIB): Retro-fittable GPIB (IEEE-488) interface card.
