For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

Hệ thống kiểm tra cộng hưởng AC EPHIPOT EPCZ-560kVA/40kV (560kVA ;40kV)

ModelEPCZ-560kVA/40kV
Liên hệ
Thanh toán an toàn
Hỗ trợ chuyên nghiệp
Đổi trả dễ dàng
Giao hàng tận nơi

Điện áp đầu ra định mức: Điện áp đầu ra định mức: 0~40kV

Dạng sóng điện áp cộng hưởng: sóng hình sin, tỷ lệ biến dạng dạng sóng <1.0%

Dòng thử nghiệm tối đa: 1.75A 14A

Công suất thử tối đa: 560kVA

Tần số đầu ra: 30~300Hz

Thời gian làm việc: Thời gian làm việc liên tục là 60 phút ở công suất tối đa

Hệ số chất lượng: 30~90

Nguồn điện đầu vào: Ba pha 380V±5%, 50Hz

Nhiệt độ môi trường: -15℃~+40℃

Độ ẩm tương đối: <90RH%, không ngưng tụ

Độ cao: <5000m

Tiếng ồn: ≤50dB

The system is consisted by below units:

-Variable Frequency Power supply

-Exciting Transformer

-HV Reactor

-Capacitive Divider

-Accessories Carrycase (connection wires)

Application and requirement:

1. Meet the 15.6kV/1000MVA generator AC withstand voltage test, capacitance≤1.4uF, test frequency 45~65Hz, test voltage U≤34.8kV (2Un+3). Test time: 1 minute

2. Meet 10kV/300mm2 cable AC withstand voltage test, capacitance≤1.12uF, test frequency 30~300Hz, test voltage U≤22kV. Test time: 5 minutes

3. Meet 35kV/300mm2 cable AC withstand voltage test, capacitance≤0.398uF, test frequency 30~300Hz, test voltage U≤52kV. Test time: 60 minutes

4. Meet the AC withstand voltage test of 10kV transformer, switch, etc., capacitance ≤0.0006uF, test frequency 30~300Hz, test voltage U≤35kV. Test time: 1 minute.

Device capacity determination:

The capacity of the equipment is designed to be 560kVA/40kV divided into 8 reactors, and the single reactor is 40kV/1.75A/70H in combination to meet the test requirements of the above-mentioned tested product.

Conclusion determination:

1. 15.6kV/1000MW generator, electric capacity ≤1.4μF, test frequency 45-65Hz, test voltage 34.8kV.

Use 8 reactors in parallel, at this time the inductance is L=70/8=8.6H

Test frequency f=1/2π√LC=1/(2×3.14×√8.6×1.4×10-6)=45.2Hz.

Test current I=2πfCUTest =2π×45.2×1.4×10-6×34.8×103=13.77A

When 8 reactors are used in parallel, the maximum current is 14A, so 14A>13.77A, this set of equipment can meet the requirements of the above tested product.

2. 15.6kV/10MW generator, electric capacity ≤0.1μF, test frequency 45-65Hz, test voltage 34.8kV.

Use 1 reactor, at this time the inductance is L=70

Test frequency f=1/2π√LC=1/(2×3.14×√70×0.1×10-6)=60Hz.

Test current I=2πfCUTest =2π×60×0.1×10-6×34.8×103=1.15A

The maximum current of 1 reactor is 1.75A, so 1.75A>1.15A, this set of equipment can meet the requirements of the above tested product.

Conclusion: The device capacity is set to 560kVA/40kV, divided into 8 reactors, and the single reactor is 40/1.75A/70H in combination to meet the test requirements of the tested product.

Cập nhật các ưu đãi mới nhất

Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.

Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụChính sách bảo mật của chúng tôi.

Hỗ trợ nhanh

Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi