Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Dòng điện kiểm tra: TỰ ĐỘNG, <20mA, 40mA, 200mA, 1A, 5A, 10A
Phạm vi đo & độ chính xác:
+ 0.5mΩ~0,8Ω (10A) & ±0.2%(±2 chữ số):
+ 1mΩ-4Ω (5 A) & ±0.2%(±2 chữ số):
+ 5mΩ-20Ω (1 A) & ±0.2%(±2 chữ số):
+ 100mΩ-100Ω (200mA) & ±0.2%(±2 chữ số):
+ 1Ω-500Ω (40mA) & ±0.2%(±2 chữ số):
+ 100Ω-100KΩ (<20mA) & ±0.5%(±2 chữ số):
Độ phân giải: 0.1μΩ
Màn hình: Màn hình LCD màu cảm ứng 7 inch
Lưu trữ dữ liệu: 1000 nhóm
Nguồn điện: AC 220V±10V,50Hz±1Hz
Cầu chì: 2A
Mức tiêu thụ tối đa: 200W
Điều kiện làm việc: Nhiệt độ: 0°~40°; Độ ẩm tương đối: <90% RH, không ngưng tụ
Kích thước: L360mm X W290mmX H170mm
Trọng lượng: Máy chính 6kg; Túi đựng que đo 5kg
General Information:
Transformer DC resistance is a necessary test item for factory test, installation, overhaul, change of tap changer, handover test and preventive test of power department. It can check the welding quality of the winding joint and whether there is turn to turn short circuit in the winding. It can check whether the contact of each position of the voltage tap changer is good, whether the actual position of the tap changer is consistent with the indicated position, whether the outgoing line is broken, whether there is broken strand in the parallel winding of multi strand wires, etc.
EPWT series Transformer Ohmmeter, also called DC Winding Resistance Tester is applied to detect the welding quality of winding contactors are in good condition or not, and if there is turn-to-turn short circuit in winding. It also can detect the connecting and its’ indicators of voltage on load tap changer are in good condition or not. EPWT is designed specifically to measure DC resistance values of transformer windings and any DC resistance of an inductive device.
Feature:
-The maximum output voltage of the instrument is 24V, which is convenient for selecting a larger test current at high resistance and increasing the test speed.
-Selectable current positions, large measurement range, suitable for the DC resistance values measuring of small and medium-sized transformers and VTs.
-Full protection functions to ensure safety and availability. Back-EMF impact, test line interruption, power failure, and overheating of the power supply. It can reliably protect the back-EMF impact on the instrument and sound the alarm synchronously.
-With any temperature conversion function of copper and aluminum material, touch screen to enter any winding temperature and conversion temperature.
-Fast response, the on load top changer could be converted during the measuring, the tester to fresh the data automatically.
-Intelligent power management technology, small consumption, less heating.
True color LCD touch screen.
-1000 groups’ data storage no lost even power failure.
-Bluetooth, RS232, and USB interface, easy communicate with PC and U disk.
-Built-in micro-printer, can print the test results.
