For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

Bộ chuyển đổi/ điều khiển đo oxy hòa tan Alpha DO 2000 Eutech TSDOCTP2000W (galvanic, gắn tường)

ModelTSDOCTP2000W
Xuất xứSingapore
Liên hệ
Thanh toán an toàn
Hỗ trợ chuyên nghiệp
Đổi trả dễ dàng
Giao hàng tận nơi

- Dissolved Oxygen

Range: 0.00 to 25.00 mg/L or ppm; 0.0 to 300.0 %

Resolution: 0.01 mg/L or ppm; 0.1 %

Accuracy: ±1.5 % of full scale reading

- Temperature

Range: -10.0 to 125.0 ºC / 14.0 to 157.0 ºF

Resolution: 0.1 ºC / 0.1 ºF

Accuracy: ±0.5 ºC / ±0.9 ºF

Sensor: Pt100/Pt1000; 2 or 3 wire

- Compensation:

Temperature Compensation: Auto/manual

Salinity Compensation: 0.0 to 50.0 ppt (manual setting and automatic correction)

Pressure Compensation: 0.740 to 3.000 bar ; 555 to 2250 mmHg ;

10.73 to 43.51 psi (manual setting and automatic correction)

- Set Point And Controller Functions

Set Point 1 (SP1) /set Point 2 (SP2): 0.00 to 25.00 mg/L or ppm; 0.0 to 300.0 %

Switching DO Hysteresis: ±1.0 pH

Function (Switchable): P/PI control (pulse length/pulse frequency/proportional integral);

limit control; off

Adjustable Period With Pulse Length Controller: 0.5 to 20 sec

Adjustable Period With Pulse Frequency Controller: 60 to 120 pulse/min

Integral Action Time (IAT): 0.0 to 999.9 min

Pickup/Dropout Delay: 0 to 2000 sec

Wash Cycle: 0.1 to 200.0 hr

Wash Duration: 1 to 2000 sec

Contact Outputs: 1 SPDT, 3 SPST relays

Switching Voltage/ Current/Power:

1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA

1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA

- Alarm Functions

Function (Switchable): Steady or fleet (pulse)

Pickup Delay: 0 to 2000 sec

Switching Voltage/ Current/Power:

1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA

1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA

- Electrical Data And Connections

Transmitter Function: Two 0/4 to 20 mA outputs for Dissolved Oxygen values and temperature, galvanically isolated

CU 22 Function: 22 mA current output

Isolated Output Voltage: 12 V ±0.5 V (max. 50 mA)

Hold Function Switch: To freeze output current and deactivate control relays

Load: Max. 600 Ohm

DO Input: 2-pin terminal

Connection Terminal: 5-pin, 8-pin, 9-pin & 13-pin terminal, detachable blocks

- Display

LCD: UV coat, backlit 14 segments display with symbols for status information

Backlight: On/off selectable with four level of brightness control

- Power Supply

Input: 80 to 250 VAC/DC ; 50/60 Hz ; 10 VA

Main Fuse: 315 mA, anti surge, 250 V

Operating Temperature Range: 0 ºC to 50 ºC

Max. Relative Humidity: 80 % up to 31 ºC decreasing linearly to 50 % at 40 ºC

- Dimensions (WxHxD): 144 x 144 x 111.5 mm

Weight: 745 g (unit) / 1100 g (packed)

Ingress Protection: IP66 (NEMA 4X)

Include: cable glands, terminal blocks, cable glands, gasket, etc

Datasheet


Manual


Cập nhật các ưu đãi mới nhất

Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.

Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụChính sách bảo mật của chúng tôi.

Hỗ trợ nhanh

Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi