For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

Thiết bị đo độ ẩm gỗ và thạch cao Finna 9XDC

Model9XDC
Xuất xứ.
Bảo hành12 tháng
Liên hệ
Thanh toán an toàn
Hỗ trợ chuyên nghiệp
Đổi trả dễ dàng
Giao hàng tận nơi

Máy đo độ ẩm dựa trên bộ vi xử lý cầm tay cung cấp khả năng đọc độ ẩm nhanh chóng và chính xác.

Hiển thị nội dung độ ẩm thực tế, không có yêu cầu biểu đồ hoặc bảng hiệu chuẩn.

Đo độ ẩm thạch cao trong khoảng từ 3% đến 7%.

Đo độ ẩm gỗ trong khoảng từ 12% đến 28%.

Phương pháp đo : kim tích hợp kim 1/2 "

Vận hành: cầm tay

Nguồn : pin

Tính năng tiếp xúc: Có tiếp xúc

Phương pháp đo: Tần số vô tuyến

Tính năng đọc : Digital

Phụ kiện: bốn kim tiêm phụ tùng, pin 9V DC và hướng dẫn vận hành


Product Description

The Model 9XDC wood & plaster moisture meter, also known at the painter’s moisture meter, is a low-cost, rugged meter designed to test the moisture content of wood, dry-wall and wall plaster.

It is widely known that blistering, peeling and scaling of paint are the results of painting surfaces that have not dried thoroughly. Even when using water based paints, it is crucial to proper paint performance to be sure the material is at the right moisture content before painting. If you are a painting contractor, paint dealer, building inspector or architect, the Model 9XDC provides a reliable means of spot-checking surfaces before paint is applied.

In addition, Model 9XDC wood & plaster moisture meter is also helpful in detecting roof, plumbing leaks as well as wood rot before extensive damage occurs. The wood technology indicates that wood rot is most common when wood moisture content exceeds 20 percent. Users in the pest industry will find the Model 9XDC invaluable in helping to locate conditions where wood decay and “dry-rot” are creating a breeding ground for pests.

Key Model 9XDC wood & plaster moisture meter features:
  • Easy to use, simply insert the needle into test area
  • Portable pocket size meter weighs less than 8 ounces
  • Easy to read LED lights shows actual moisture content, no calibration chart or tables!
  • Advanced, micro-controller circuit requires no adjustments
  • Test moisture content from 12% to 28% for wood and 3% to 7% for plaster
  • Ideal for Painters, Contractors, Lumber Yards, Exterminators, and Hobbyists

Additional Information

Process

Handheld

Pin Feature

Pin

Contact Feature

Contact

Measurement Method

Radio Frequency

Reading Feature

Digital

Related Accessories



Cập nhật các ưu đãi mới nhất

Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.

Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụChính sách bảo mật của chúng tôi.

Hỗ trợ nhanh

Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi