Máy do độ ẩm gỗ Finna DC-2000 | EMIN.VN

Máy do độ ẩm gỗ Finna DC-2000

Name: Máy do độ ẩm gỗ Finna DC-2000
Brand: Finna

Có sẵn: 0 Cái

Hãng sản xuấtFinna

ModelDC-2000

Xuất xứ.

Bảo hànhBảo hành: 12 tháng

Liên hệ

Số lượng

Thanh toán an toàn

Hỗ trợ chuyên nghiệp

Đổi trả dễ dàng

Giao hàng tận nơi

Ứng dụng : máy đo độ ẩm gỗ

Dãy đo : 5-65%

Thiết bị cầm tay , sử dụng pin 9V

Đo trực tiếp

Phương pháp đo : tần số vô tuyến

Hiển thị : Digital

Model DC-2000: Wood Moisture Meter

The Model DC-2000 Wood Moisture Meter is a portable hand-held microprocessor that provides fast and accurate digital moisture read-out in the moisture range of 5 to 65 percent range. Auto ranging with self-checking and low battery indication. Complete with Two Built-in Needles, Four Spare Needles, 9V DC Battery and Operating Instructions Book. Shipping weight is 2 pounds.

Key Features:

Easy to use, simply insert the needle into the test area
Tough, pocket size instrument weighs less than 8 ounces
Easy to read LCD display shows actual moisture content, no calibration chart or tables!
Advanced, micro-controller circuit no adjustments are necessary
Operates on a single 9-Volt battery
Test wood moisture content from 5% to 65%
Ideal for Contractors, Lumber Yards, Exterminators, and Hobbyists

Product Description

The Model DC-2000 wood moisture meter is designed and calibrated to test the moisture content of lumber, wood products and surfaces to be painted. This easy-to-operate instrument can be used in factories, mills and yards by anyone regardless of their technical skill to obtain accurate, immediate results.

The Model DC-2000 has two built-in 7/16″ needles and determines the moisture content by measuring the electrical resistance between the needles that are driven into the wood. The instrument reads the wettest portion of the wood rather than averaging the moisture content which might otherwise be misleading. Several tests can be taken along a board in less than a minute to also disclose any gradients or wet streaks.

In addition to its accuracy and versatility, the Model DC-2000 wood moisture meter can be used:

to estimate the shrinkage of wood
to check for gradient distribution of moisture.
to locate conditions where wood decay and dry-rot are creating a breeding ground for pests.
to trace water leaks in walls and roofs before painting or rot takes place.

Additional Information

Process	Handheld
Pin Feature	Pin
Contact Feature	Contact
Measurement Method	Radio Frequency
Reading Feature	Digital
CATALOG