Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi
Đăng ký nhận chiết khấu độc quyền, cập nhật giá sỉ và tin sản phẩm mới nhất ngay tại hộp thư của bạn.
Bằng cách đăng ký, bạn đồng ý với Điều khoản dịch vụ và Chính sách bảo mật của chúng tôi.
Kết nối trực tiếp với đội ngũ chuyên gia của chúng tôi

Model DG-9 Moisture Meter được thiết kế để bán chất rắn; vật liệu dạng bột, dạng hạt hoặc dệt; và tấm dễ uốn ở dạng cuộn hoặc ngăn xếp.
Dãy đo : 0-60%
Thiết bị cầm tay, sử dụng pin 9V
Đo trực tiếp
Phương pháp đo : tần số vô tuyến
Model DG-9 Moisture Meter is designed for semi-solids; powdered, granular or textile materials; and pliable sheets in rolls or stacks.
Key Features
The Model DG-9 offers flexibility and adaptability for almost any moisture application. This instrument uses digital microcomputer circuitry to provide fast, accurate and reliable non-destructive moisture measurement for many products. The Model DG-9 may be used for comparative testing without calibration or to determine the actual percentage of moisture after calibration. The Model DG-9 will hold 100 different calibration curves. These curves are stored in permanent memory in tables 00 through 99. A fully discharged battery will not cause data in the table to be lost. The DG-9 can test materials with a fairly constant bulk density and a consistent change of radio frequency properties with change in moisture content. These materials include semisolids; powdered, granular, textile materials; pliable sheets in rolls or stacks, chips, chunks or flakes.
Operating on the radio frequency power loss absorption principle, which is a patented feature of Moisture Register Products, the DG-9 projects an RF field into the test area. This RF field extends approximately three inches (7.6 cm) surrounding DG-9’s electrode needles.
Materials containing moisture will absorb part of this RF energy current and cause a change in the meter readings. When calibrated to the material being tested, the meter reading is in direct moisture content.
The DG-9 consists of a needle electrode assembly, which connects to a sensitivity module, which is connected to the meter by a three foot (0.9 meter) cable. The molded plastic handle contains a spring loaded switch bar for momentary testing, while the On-Off switch permits a series of tests.
Tests can be made by inserting the needles directly through a sack, or between layers of paper or other stacks of soft material. Greater accuracy is achieved by measuring a large volume of sample.
The Model DG-9 is furnished with the proper sensitivity modules which are pre-selected to cover the desired range of moisture contents for the material being tested. Any of 7 modules can be added as use of the instrument is extended to new material and ranges.
Interchangeable Sensitivity Modules
The use of solid state sensitivity modules gives the DG-9 a broad moisture range capability. The modules permit more sensitivity in low moisture ranges as well as the ability to check high moisture content of up to 60% on some materials. Seven different sensitivity modules are available, each with varying degrees of sensitivity. Beginning with the highest sensitivity (for very low moisture content), the modules available are: 250, 150, 100, 070, 050, 030, and 010. The 010 is the least sensitive module, and in most cases is used in high moisture applications.
Features
| Process | Handheld |
|---|---|
| Pin Feature | Pin |
| Contact Feature | Contact |
| Measurement Method | Radio Frequency |
| Reading Feature | Digital |
| CATALOG |