Máy đo độ ẩm vật liệu hạn hẹp Finna N8 | EMIN.VN

Máy đo độ ẩm vật liệu hạn hẹp Finna N8

Name: Máy đo độ ẩm vật liệu hạn hẹp Finna N8
Brand: Finna

Có sẵn: 0 Cái

Hãng sản xuấtFinna

ModelN8

Xuất xứ.

Bảo hànhBảo hành: 12 tháng

Liên hệ

Số lượng

Thanh toán an toàn

Hỗ trợ chuyên nghiệp

Đổi trả dễ dàng

Giao hàng tận nơi

Ứng dụng : đo độ ẩm những vật liệu bị giới hạn hoặc có thiết kế cho các bề mặt phẳng, cong, nhẵn hoặc thô như nón hoặc dầm sợi, cuộn hoặc ngăn xếp vải, cuộn hoặc chồng giấy hoặc bìa, thảm, gạch, vv.

Dãy đo : 0-35%

Thiết bị cầm tay, sử dụng pin sạc

Đo trực tiếp

Phương pháp đo : tần số vô tuyến

Hiển thị : analog

Nguồn điện sạc : 220VAC

Model N8: Narrow Materials Moisture Meter

The Model N8 is designed for flat, curved, smooth, or rough surfaces such as cones or beams of yarn, rolls or stacks of cloth, rolls or stacks of paper or paperboard, carpets, tiles, etc. The electrode covers an area of 1-1/4 x 3 inches and penetrates ½ inch into the product. Complete with Rechargeable Battery, Carrying Case and Operating Instructions Book.

Product Description

The Model N8 narrow materials moisture meter permits nondestructive tests for moisture content on most flat, curved, solid or semi-solid materials.

The N8 is ruggedly constructed, easy-to-use instrument with intergrated solid-state circuitry for reliability and long battery life. Its light weight design includes a molded handle with a spring-loaded switch bar that permits testing with either hand. Finna Group’s patented electrode designs project an RF field into the sample. The RF signal loss due to the presence of moisture is measured and displayed directly as “Moisture Content Percentage”.

The N8 is equipped with four sensitivity settings to provide moisture measurement in the range of 0-35% on most materials. The Zero Suppression feature provides scale overlap in all ranges from 0% to high moisture content. Built-in electrical standards for each range allows for calibration checks at any time by turning a switch, and a built-in adjustment trimmer for each range permits calibration to be reset if necessary. A battery regulator circuit provides constant calibration as the battery discharges.

Model N8: Narrow Materials Moisture Meter Features

Designed for materials with a minimum width of 1-1/4″ (3.2 cm) such as narrow cones of yarn or thread, small spools of paper yarn and narrow papers.
The electrode covers an area of 1-1/4″ x 3″ (3.2 cm x 7.6 cm).
Electrode Penetration: 1/2″ (1.3 cm).
Sample calibration curves available for a wide range of materials.

Additional Information

Process	Handheld
Pin Feature	Pinless
Contact Feature	Contact
Measurement Method	Radio Frequency
Reading Feature	Analog
Voltage	115 VAC, 220 VAC
CATALOG